FireCADCalc

Magnesia in Place of Lime (Hugot)

Magnesia (MgO) to replace a share of the hydrated lime used in clarification on an equal-alkalinity basis (Hugot ch. 28), and the lime still needed.

Sugar mill and cogeneration

Inputs

Examples: Hugot: 0.8 kg lime, half replaced70 % replaced90 % MgO product, half replaced

Hugot: 50–80 % is best.
100 % for pure MgO; enter the product's assay to get the product mass.

Results

Magnesia reacts slowly: give it about 20 minutes and use a grade finer than 325 mesh. It cuts scale in the evaporators.

Magnesia product per tonne cane0.21759kg/t
Hydrated lime still needed per tonne cane0.40000kg/t
Magnesia product per hour21.759kg/h
Hydrated lime replaced by 1 kg MgO1.8383

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot: 0.8 kg lime, half replaced. The inputs, in the units selected above:

InputValue
Crushing rate100.00 t/h
Hydrated lime Ca(OH)₂ per tonne cane (not CaO)0.80000 kg/t
Share of the alkalinity supplied by magnesia50.000 %
MgO content of the magnesia product100.00 %

Applying the formula below gives:

ResultValue
Magnesia product per tonne cane0.21759 kg/t
Hydrated lime still needed per tonne cane0.40000 kg/t
Magnesia product per hour21.759 kg/h
Hydrated lime replaced by 1 kg MgO1.8383

Open this example in the calculator and change any input.

Formula

\(k = \frac{M_{Ca(OH)_2}}{M_{MgO}}, \quad d_M = \frac{x\,d_L}{k\,p_M}, \quad d_L' = (1 - x)d_L\)

Variables

Symbol Meaning SI unit
\(A\) Crushing rate kg/s
\(d_L\) Hydrated lime per tonne cane kg/kg
\(x\) Share of the alkalinity supplied by magnesia -
\(d_M\) MgO per tonne cane kg/kg
\(d_L'\) Hydrated lime still needed per tonne cane kg/kg
\(\dot m_M\) MgO per hour kg/s
\(k\) Hydrated lime replaced by 1 kg MgO -
\(p_M\) MgO content of the magnesia product -

Method and standards

Equal-alkalinity replacement.

Where it is used

  • Trials of magnesia in clarification.
  • Reagent budgets.

Common mistakes

  • Using CaO and hydrated lime interchangeably.
  • Expecting magnesia to react as fast as lime.

Assumptions and limits

  • The lime dose is hydrated lime, Ca(OH)₂. A dose quoted as CaO (as in the milk-of-lime calculator) must first be multiplied by 74.09/56.08 = 1.32.
  • The magnesia product mass allows for its MgO content p_M; at 100 % it is pure MgO.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 28
  • magnesia
  • pp. 429–430
  • Equivalence by molar mass: 1 MgO ≡ 1 Ca(OH)₂

Questions and answers

Why use magnesia?

Magnesium salts are more soluble than calcium salts, so less scale forms in the evaporators.

How much MgO replaces lime?

1 kg MgO gives the alkalinity of about 1.84 kg of hydrated lime or 1.39 kg of CaO.

Why not replace all the lime?

Magnesia reacts slowly and costs more; Hugot finds 50–80 % replacement best.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.