Worked example
Example: 100 TCH SRI. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crushing rate | 100.00 t/h |
| Juice volume per tonne cane | 1.0000 m³/t |
| Settling velocity | 100.00 mm/min |
| Share of the cross-section taken by the deflector | 25.000 % |
| Working depth | 1.2000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Net settling area | 16.667 m² |
| Gross cross-section | 22.222 m² |
| Diameter | 5.3192 m |
| Volume | 26.667 m³ |
| Juice residence | 16.000 min |
Open this example in the calculator and change any input.
Formula
\(S_n = \frac{A v_j}{u}, \quad S_g = \frac{S_n}{1 - \phi_d}, \quad V = S_g H, \quad t_r = \frac{V}{A v_j}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(A\) | Crushing rate | kg/s |
| \(v_j\) | Juice volume per tonne cane | m³/kg |
| \(u\) | Settling velocity | m/s |
| \(\phi_d\) | Share of the cross-section taken by the deflector | - |
| \(H\) | Working depth | m |
| \(S_n\) | Net settling area | m² |
| \(S_g\) | Gross cross-section | m² |
| \(D\) | Diameter | m |
| \(V\) | Volume | m³ |
| \(t_r\) | Juice residence | s |
Method and standards
Settling continuity and geometry.
Where it is used
- Selecting rapid clarifiers.
- Checking residence times.
Common mistakes
- Ignoring the deflector area.
- Using settling rates without flocculant.
Assumptions and limits
- Steady flow; good flocculation.
- The residence uses the gross volume, including the deflector share, with no deduction for mud; the real juice residence is shorter.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 29
- short-retention clarifiers
- pp. 440–442
Questions and answers
Why short retention?
Less time at 100 °C means less inversion, colour and loss of reducing sugars.
What makes it work?
Flocculant: settling at 10 cm/min instead of about 1 cm/min in tray clarifiers.
What is the deflector?
A central cone that spreads the feed; its area does not settle mud.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.