FireCADCalc

Milk of Lime: Baumé, Density and Dose

Specific gravity and density of milk of lime from degrees Baumé, CaO needed per hour from the dose per tonne of cane, and the milk-of-lime flow.

Sugar mill and cogeneration

Inputs

Examples: 15 °Bé, 0.9 kg/t10 °Bé, 1.2 kg/t

From your lab or the lime table for the Baumé reading.
Hugot ch. 24: 0.5–0.8 kg CaO per t cane for raw sugar; hot liming takes 15–20 % less.

Results

Specific gravity 145/(145 − °Bé)1.1154
Density (water at 60 °F, 999.0 kg/m³)1,114.3kg/m³
CaO needed225.00kg/h
Milk-of-lime flow1,500.0L/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 15 °Bé, 0.9 kg/t. The inputs, in the units selected above:

InputValue
Baumé (heavy-liquid scale)15.000 -
CaO content of the milk of lime150.00 g/L
Lime dose as CaO per tonne cane0.90000 kg/t
Crushing rate250.00 t/h

Applying the formula below gives:

ResultValue
Specific gravity 145/(145 − °Bé)1.1154
Density (water at 60 °F, 999.0 kg/m³)1,114.3 kg/m³
CaO needed225.00 kg/h
Milk-of-lime flow1,500.0 L/h

Open this example in the calculator and change any input.

Formula

\(SG = \frac{145}{145 - {}^\circ\!B\acute e}, \quad \dot V = \frac{d\,C}{c_{CaO}}\)

Variables

Symbol Meaning SI unit
\(°Bé\) Baumé (heavy-liquid scale) -
\(c_{CaO}\) CaO content of the milk of lime kg/m³
\(d\) Lime dose as CaO per tonne cane kg/kg
\(C\) Crushing rate kg/s
\(SG\) Specific gravity 145/(145 − °Bé) -
\(\rho\) Density (water 999.0 kg/m³) kg/m³
\(\dot m_{CaO}\) CaO needed kg/s
\(\dot V\) Milk-of-lime flow m³/s

Method and standards

Baumé scale; mass balance.

Where it is used

  • Lime station sizing.
  • Lime consumption reports.

Common mistakes

  • Light-liquid Baumé scale used.

Assumptions and limits

  • Uniform suspension.
  • The CaO content is your own figure; it is not checked against the Baumé reading, and the specific gravity and density do not enter the dose. Take the CaO for the reading from your laboratory's lime table.
  • Density = SG × 999.0 kg/m³, the density of water at 60 °F (15.6 °C), the reference of the US Baumé scale.

References

  • Baumé heavy-liquid scale SG = 145/(145 − °Bé) (US standard modulus 145)
  • Mass balance for the lime dose

Questions and answers

Why is CaO an input?

The CaO content for a Baumé reading depends on lime quality and temperature; use your lab table.

Which Baumé scale?

The heavy-liquid scale with modulus 145.

Dose control?

Liming is controlled on juice pH; this gives the average consumption.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.