Worked example
Example: 100 mm storm, CN 80, 100 ha. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Storm rainfall | 100.00 mm |
| Curve number | 80.000 - |
| Initial abstraction ratio | 0.20000 - |
| Catchment area | 100.00 ha |
Applying the formula below gives:
| Result | Value |
|---|---|
| Potential maximum retention | 63.500 mm |
| Initial abstraction | 12.700 mm |
| Runoff depth | 50.539 mm |
| Runoff volume | 50,539 m³ |
| Runoff coefficient | 50.539 % |
Open this example in the calculator and change any input.
Formula
\(S = \frac{25400}{CN} - 254, \quad Q = \frac{(P - \lambda S)^2}{P - \lambda S + S}\ \ (P > \lambda S)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(P\) | Storm rainfall | m |
| \(CN\) | Curve number | - |
| \(\lambda\) | Initial abstraction ratio | - |
| \(A\) | Catchment area | m² |
| \(S\) | Potential maximum retention | m |
| \(I_a\) | Initial abstraction | m |
| \(Q\) | Runoff depth | m |
| \(V\) | Runoff volume | m³ |
| \(Q/P\) | Runoff coefficient | - |
Method and standards
SCS runoff equation.
Where it is used
- Storm drainage and pond sizing.
- Plant site drainage.
Common mistakes
- Using CN for the wrong soil group.
- Applying it to short-duration intensities.
Assumptions and limits
- Storm totals; average antecedent moisture.
References
- USDA NRCS
- National Engineering Handbook part 630
- ch. 10 (runoff equation)
Questions and answers
What does the curve number mean?
Higher CN means less infiltration: about 98 for paved areas, 70–85 for open ground depending on soil, 30–60 for woods on sandy soil.
Why is there no runoff from small storms?
The first rain fills depressions and soaks in (initial abstraction) before any runs off.
What do the defaults represent?
A 100 mm storm on a 100 ha catchment with CN 80.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.