FireCADCalc

Beverage Carbonation: CO₂ Volumes from Pressure and Temperature

Dissolved CO₂ in water at equilibrium as volumes (at 0 °C, 1 atm) and g/L from the CO₂ partial pressure and temperature, with Henry's constant from IAPWS G7-04.

Distillery and ethanolFood, dairy and textile

Inputs

Examples: 3.5 bar CO2 at 4 °CBeer 1.6 bar at 2 °C

Absolute: add the atmospheric pressure (about 1.01 bar) to a gauge headspace reading.

Results

IAPWS notes G7-04 is not meant for precise work near ambient temperature; treat results as ±5 %. Water only: sugar and alcohol lower solubility.

Henry's constant81.781MPa
Mole fraction of CO₂ in the liquid1,956.4ppm
CO₂ volumes (0 °C, 1 atm, per volume of water)2.4222
CO₂ concentration4.7888g/L

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 3.5 bar CO2 at 4 °C. The inputs, in the units selected above:

InputValue
CO₂ partial pressure (absolute)3.5000 bar
Temperature4.0000 °C

Applying the formula below gives:

ResultValue
Henry's constant87.812 MPa
Mole fraction of CO₂ in the liquid3,985.8 ppm
CO₂ volumes (0 °C, 1 atm, per volume of water)4.9448
CO₂ concentration9.7758 g/L

Open this example in the calculator and change any input.

Formula

\(x = \frac{p_{CO_2}}{k_H(T)}, \quad c = \frac{x}{1 - x}\cdot\frac{\rho_w}{M_w}\cdot M_{CO_2}, \quad V_{CO_2} = \frac{c}{\rho_{CO_2,0}}\)

Variables

Symbol Meaning SI unit
\(p_{CO_2}\) CO₂ partial pressure (absolute) Pa
\(T\) Temperature K
\(k_H\) Henry's constant Pa
\(x\) Mole fraction of CO₂ in the liquid -
\(V_{CO_2}\) CO₂ volumes (0 °C, 1 atm, per volume of water) -
\(c\) CO₂ concentration kg/m³
\(\rho_w\) Water density, taken as 1 kg/L kg/m³
\(M_w\), \(M_{CO_2}\) Molar masses of water (18.015) and CO₂ (44.009) kg/kmol
\(\rho_{CO_2,0}\) Density of CO₂ gas at 0 °C and 1 atm, 1.977 kg/m³

Method and standards

Henry's law with IAPWS G7-04.

Where it is used

  • Carbonator settings.
  • Bottling quality checks.

Common mistakes

  • Using gauge pressure.
  • Applying to sugary or alcoholic liquids without correction.

Assumptions and limits

  • Pure water; equilibrium.
  • The CO₂ pressure is absolute: a gauge headspace reading needs the atmospheric pressure added (otherwise the volumes are about 1.4 low at 4 °C).
  • Volumes are on the real-gas basis the brewing and soft-drink industries use: CO₂ at 0 °C and 1 atm weighs 1.977 g/L (about 22.26 L/mol, against 22.414 for an ideal gas), so 1 volume = 1.977 g/L.

References

  • IAPWS G7-04 (2004): Henry's constant of CO₂ in water
  • Volumes at 0 °C and 101.325 kPa (22.414 L/mol); water density taken as 1 kg/L

Questions and answers

What is a 'volume' of CO₂?

The volume of CO₂ gas at 0 °C and 1 atm dissolved per volume of liquid, taking real CO₂ at 1.977 g/L, so 1 volume is 1.977 g/L.

What levels are usual?

Beer 2.2–2.8 volumes, colas 3.5–4, sparkling water up to 5.

Why chill to carbonate?

Henry's constant rises with temperature: cold water holds much more CO₂ at the same pressure.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.