Worked example
Example: 100 t whole milk 12.5 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Milk or concentrate | 100,000 kg |
| Total solids | 12.500 % |
| Powder moisture | 3.5000 % |
| Solids losses | 1.0000 % |
| Feed density (milk or concentrate) | 1,032.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Powder | 12.824 t |
| Water removed | 87.051 t |
| Powder per 1000 L of feed (milk or concentrate) | 132.34 g/L |
Open this example in the calculator and change any input.
Formula
\(M_p = \frac{M\,TS(1 - L)}{1 - w_p}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M\) | Milk or concentrate | kg |
| \(TS\) | Total solids | - |
| \(w_p\) | Powder moisture | - |
| \(L\) | Solids losses | - |
| \(\rho\) | Milk density | kg/m³ |
| \(M_p\) | Powder | kg |
| \(M_w\) | Water removed | kg |
| \(M_p/V\) | Powder per 1000 L of milk | kg/m³ |
Method and standards
Total solids balance.
Where it is used
- Dairy yield accounting.
Common mistakes
- Using volume without density.
- Ignoring losses.
Assumptions and limits
- Solids conserved except the loss share.
- The powder per 1000 L refers to the feed entered: for a concentrate it is per 1000 L of concentrate, not of the original milk.
References
- Mass and energy balances (definitions): total solids balance
Questions and answers
How much powder from 1000 L?
About 130 kg of whole milk powder from milk with 12.5 % solids.
Where do losses occur?
Fines in exhaust air, deposits and start-up, usually 1–2 %.
Why low powder moisture?
Below 4 % keeps powder free-flowing and stable.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.