FireCADCalc

Brine Strength: Salometer Degrees, % Salt and Salt to Add

Converts brine strength between salometer degrees and % NaCl by mass (100 °SAL = saturated, 26.4 %) and gives the salt to dissolve in water for a target strength.

Food, dairy and textile

Inputs

Examples: 10 % NaCl brine, 1 t water60 °SAL

Results

Salt by mass10.000%
Salometer degrees37.879
Salt to dissolve in the water111.11kg

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 % NaCl brine, 1 t water. The inputs, in the units selected above:

InputValue
Strength entered as% NaCl by mass
Strength10.000 -
Water1,000.0 kg

Applying the formula below gives:

ResultValue
Salt by mass10.000 %
Salometer degrees37.879
Salt to dissolve in the water111.11 kg

Open this example in the calculator and change any input.

Formula

\(x = 0.264\cdot\frac{°SAL}{100}, \quad M_s = M_w\frac{x}{1 - x}\)

Variables

Symbol Meaning SI unit
\(\text{basis}\) Strength entered as -
\(s\) Strength -
\(M_w\) Water kg
\(x\) Salt by mass -
\(°SAL\) Salometer degrees -
\(M_s\) Salt to dissolve in the water kg

Method and standards

Salometer definition and mass balance.

Where it is used

  • Pickling, cheese brining and refrigeration brines.

Common mistakes

  • Adding salt as a % of the final brine instead of the water.
  • Using % w/v.

Assumptions and limits

  • NaCl brine near room temperature; strengths above saturation (26.4 %, 100 °SAL) are rejected.

References

  • Definitions and mass and energy balances: salometer scale with 100 °SAL = saturated brine (26.4 % NaCl at about 15.6 °C)

Questions and answers

What is a salometer degree?

1 % of saturation: 100 °SAL is saturated brine at 26.4 % NaCl.

How much salt for a 10 % brine?

About 111 g per litre of water (10/90 of the water mass).

Is it linear?

The salometer scale is defined linearly in % saturation.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.