Worked example
Example: 1500 Nm3/h at 58 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Biogas | 1,500.0 Nm³/h |
| Methane in biogas | 58.000 % |
| Methane net heating value | 35.800 MJ/Nm³ |
| Boiler efficiency (net basis) | 88.000 % |
| Steam pressure (absolute) | 11.000 bar |
| Feedwater temperature | 105.00 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| Heat input | 8.6517 MW |
| Heat per kg of steam (dry saturated) | 2,339.7 kJ/kg |
| Steam | 11.714 t/h |
Open this example in the calculator and change any input.
Formula
\(\dot Q = \dot V_b y_{CH_4} LHV, \quad \dot m_s = \frac{\eta_b \dot Q}{h_g(p) - h(p, T_{fw})}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V_b\) | Biogas | Nm³/s |
| \(y_{CH_4}\) | Methane in biogas | - |
| \(LHV\) | Methane net heating value | J/m³ |
| \(\eta_b\) | Boiler efficiency (net basis) | - |
| \(p\) | Steam pressure (absolute) | Pa |
| \(T_{fw}\) | Feedwater temperature | K |
| \(\dot Q\) | Heat input | W |
| \(\Delta h\) | Heat per kg of steam (dry saturated) | J/kg |
| \(\dot m_s\) | Steam | kg/s |
Method and standards
Energy balance.
Where it is used
- Biogas utilisation in distillery boilers.
- Fuel saving reports.
Common mistakes
- Gross efficiency with net heating value.
Assumptions and limits
- Dry saturated steam.
References
- Energy balance with IAPWS-IF97 enthalpies; methane LHV 35.8 MJ/Nm³ from 802.3 kJ/mol (NIST) by default
Questions and answers
Steam per Nm³ of biogas?
Roughly 7–8.5 kg of low-pressure steam at about 60 % methane.
Why net basis?
Biogas heating values are usually stated net; use the efficiency on the same basis.
Superheated steam?
Add the superheat enthalpy; this calculator takes dry saturated steam.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.