FireCADCalc

Steam per Evaporation and Saving of an Added Effect

Steam an n-effect evaporator needs without bleeding (about E/n) and the steam saved by adding one more effect, E/(n(n − 1)), after Hugot eqn 32.34.

Sugar mill and cogeneration

Inputs

Examples: Quadruple 80 t/hQuintuple 120 t/h

Results

Each added effect saves less: going from 3 to 4 effects saves 1/12 of the evaporation. Bleeding and losses change the absolute figures.

Steam with n effects20,000kg/h
Steam with n − 1 effects26,667kg/h
Steam saved by the n-th effect6,666.7kg/h
Evaporation per kg of steam4.0000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Quadruple 80 t/h. The inputs, in the units selected above:

InputValue
Evaporation80,000 kg/h
Number of effects4.0000 -

Applying the formula below gives:

ResultValue
Steam with n effects20,000 kg/h
Steam with n − 1 effects26,667 kg/h
Steam saved by the n-th effect6,666.7 kg/h
Evaporation per kg of steam4.0000

Open this example in the calculator and change any input.

Formula

\(S_n \approx \frac{E}{n}, \quad \Delta S = \frac{E}{n - 1} - \frac{E}{n} = \frac{E}{n(n - 1)}\)

Variables

Symbol Meaning SI unit
\(E\) Evaporation kg/s
\(n\) Number of effects -
\(S_n\) Steam with n effects kg/s
\(S_{n-1}\) Steam with n − 1 effects kg/s
\(\Delta S\) Steam saved by the n-th effect kg/s
\(E/S\) Evaporation per kg of steam -

Method and standards

Rillieux's rule as given by Hugot.

Where it is used

  • Choosing the number of effects.
  • Quick steam estimates.

Common mistakes

  • Applying it with heavy bleeding.
  • Counting the pre-evaporator twice.

Assumptions and limits

  • No bleeding; equal latent heats.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 32
  • eqn 32.34 and pp. 553 and 580–583

Questions and answers

Why does each effect save less?

Steam is E/n; the step from n − 1 to n is E/(n(n − 1)), a falling share.

Which number of effects?

Hugot: triple below about 50 t cane/h, quadruple 50–200, quintuple above.

Do heat losses change it?

Yes, slightly: real economies are a few percent below n.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.