FireCADCalc

Evaporation Needed from Juice Brix to Syrup Brix

Syrup produced and water to evaporate from the clear juice flow and the brix of clear juice and syrup (solids balance).

Sugar mill and cogeneration

Inputs

Examples: 14.5 to 65 brix16 to 60 brix

Results

Syrup32.000t/h
Water evaporated88.000t/h
Evaporation % juice73.333%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 14.5 to 65 brix. The inputs, in the units selected above:

InputValue
Clear juice flow (by mass)255.00 t/h
Clear juice brix14.500 %
Syrup brix65.000 %

Applying the formula below gives:

ResultValue
Syrup56.885 t/h
Water evaporated198.12 t/h
Evaporation % juice77.692 %

Open this example in the calculator and change any input.

Formula

\(\dot m_s = \dot m_j \frac{Bx_1}{Bx_2}, \quad E = \dot m_j - \dot m_s\)

Variables

Symbol Meaning SI unit
\(\dot m_j\) Clear juice flow (by mass) kg/s
\(Bx_1\) Clear juice brix -
\(Bx_2\) Syrup brix -
\(\dot m_s\) Syrup kg/s
\(E\) Water evaporated kg/s
\(E/\dot m_j\) Evaporation % juice -

Method and standards

Solids balance.

Where it is used

  • Evaporator station design.
  • Steam balance.

Common mistakes

  • Mixed juice brix used instead of clear.

Assumptions and limits

  • No solids lost.
  • The juice flow is by mass. A flowmeter reading in m³/h must be multiplied by the juice density (about 1.06 t/m³ at 15 brix) first, or the evaporation is understated by about 6 %.

References

  • Solids balance ṁ₁ Bx₁ = ṁ₂ Bx₂

Questions and answers

Why is evaporation about 80 % of juice?

Juice at about 15 brix becomes syrup at 60–65 brix: most of the water must go.

Does imbibition raise it?

Yes, every tonne of added water is evaporated here.

Higher syrup brix?

Less pan evaporation, but risk of crystallisation in the last body.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.