FireCADCalc

Molecular Sieve Dehydration: Water Removed

Water removed in a molecular sieve dehydration unit from the anhydrous ethanol rate and the water contents (by mass) of feed and product, with regeneration recycle.

Distillery and ethanol

Inputs

Examples: ~79 t/d anhydrousWet feed

Results

Rectified spirit at about 94.5 % v/v holds roughly 7 % water by mass.

The water removed is the net balance on fresh feed; the beds also handle the water in the regeneration recycle, so their water load is higher.

Fresh feed (rectified spirit)54.835t/d
Water removed4.8352t/d
Total feed through the beds68.544t/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: ~79 t/d anhydrous. The inputs, in the units selected above:

InputValue
Anhydrous product78.924 t/d
Water in feed (% w/w)7.0000 %
Water in product (% w/w)0.40000 %
Regeneration recycle (share of feed returned)15.000 %

Applying the formula below gives:

ResultValue
Fresh feed (rectified spirit)84.525 t/d
Water removed5.6011 t/d
Total feed through the beds99.441 t/d

Open this example in the calculator and change any input.

Formula

\(\dot m_f = \frac{\dot m_p (1 - w_p)}{1 - w_f}, \quad \dot m_w = \dot m_f - \dot m_p\)

Variables

Symbol Meaning SI unit
\(\dot m_p\) Anhydrous product kg/s
\(w_f\) Water in feed (% w/w) -
\(w_p\) Water in product (% w/w) -
\(r\) Regeneration recycle (share of feed returned) -
\(\dot m_f\) Fresh feed (rectified spirit) kg/s
\(\dot m_w\) Water removed kg/s
\(\dot m_t\) Total feed through the beds kg/s

Method and standards

Mass balance.

Where it is used

  • MSDH design checks.
  • Fuel ethanol production planning.

Common mistakes

  • % v/v used as % w/w.

Assumptions and limits

  • Ethanol not lost.
  • The water removed is the net balance on the fresh feed. The beds also adsorb water from the regeneration recycle, which returns to distillation, so the water load on the beds is higher than the net water removed; size the beds on the total feed through them.

References

  • Ethanol and water mass balance; strengths by mass (convert % v/v with the strength calculator)

Questions and answers

Why on mass?

Volumes contract on mixing; mass balances close exactly.

Regeneration recycle?

Regeneration desorbs water with ethanol vapour; that weak stream returns to distillation.

Product water limit?

Fuel ethanol specifications allow only a few tenths of a per cent water.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.