FireCADCalc

Distillation Steam per Litre and Boiler Steam for a KLPD

Specific steam in kg per litre of alcohol from measured steam and alcohol, and the steam a plant of given capacity needs at that rate.

Distillery and ethanol

Inputs

Examples: 10 t/h for 100 KLPDAtmospheric plant

Results

Multi-pressure distillation runs near 2–2.5 kg/L; atmospheric plants use more. Track the trend.

Specific steam3.6000kg/L
Steam for the planned capacity9.0000t/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 t/h for 100 KLPD. The inputs, in the units selected above:

InputValue
Steam to distillation (measured)10.000 t/h
Alcohol produced (absolute, measured)100.00 kL/d
Planned capacity150.00 kL/d

Applying the formula below gives:

ResultValue
Specific steam2.4000 kg/L
Steam for the planned capacity15.000 t/h

Open this example in the calculator and change any input.

Formula

\(s = \frac{\dot m_s}{\dot V_a}, \quad \dot m_p = s \dot V_p\)

Variables

Symbol Meaning SI unit
\(\dot m_s\) Steam to distillation (measured) kg/s
\(\dot V_a\) Alcohol produced (absolute, measured) m³/s
\(\dot V_p\) Planned capacity m³/s
\(s\) Specific steam kg/m³
\(\dot m_p\) Steam for the planned capacity kg/s

Method and standards

Definitions.

Where it is used

  • Distillery energy reporting.
  • Boiler sizing for expansions.

Common mistakes

  • Bulk litres used.

Assumptions and limits

  • Steady operation.
  • Steam is counted by mass with no pressure or enthalpy basis: compare plants and scale to a new capacity only at the same steam conditions. Scaling assumes the planned plant has the same specific steam.

References

  • Definition s = ṁ_s/V̇_a (kg per litre = t/kL)

Questions and answers

Why is it in kg/L?

Steam per litre of absolute alcohol is the distillery's main energy KPI.

What lowers it?

Higher wash strength, multi-pressure heat integration and preheating the wash.

Dehydration steam?

Include the molecular sieve's steam if you compare whole plants.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.