FireCADCalc

Carbonatation: Limestone, Kiln Gas and CO₂ Pump

Limestone and coke for a CaO dose, CO₂ produced, kiln gas at a CO₂ strength and the CO₂ pump displacement, following Hugot's example (ch. 27, pp. 422–425).

Sugar mill and cogenerationFan and blower

Inputs

Examples: Hugot example 100 TCHDouble carbonatation

Hugot Table 27.1: single or continuous double carbonatation about 18 kg/t cane.
Hugot: 8–10 kg per 100 kg limestone.
By volume in the gas as pumped, which is nearly saturated with water after washing. An analyser on dried gas reads higher: y_wet = y_dry (1 − p_w/p_g), with p_w the water vapour pressure at the gas temperature (about 20 kPa at 60 °C).

Results

Hugot's example (100 t/h, 18 kg CaO/t, 30 % CO₂, 60 °C, 68 cmHg) needs about 8 700 m³/h of pump displacement.

Limestone per tonne cane37.481kg/t
Coke per tonne cane2.9985kg/t
CO₂ produced per tonne cane24.171kg/t
CO₂ density at the pump1.4404kg/m³
Kiln gas at the pump5,593.7m³/h
CO₂ pump displacement8,790.1m³/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot example 100 TCH. The inputs, in the units selected above:

InputValue
Crushing rate100.00 t/h
CaO per tonne cane18.000 kg/t
CaCO₃ in the limestone90.000 %
Limestone margin1.0500 -
Coke per limestone8.0000 %
Carbon in the coke85.000 %
CO₂ in the kiln gas at the pump (wet basis)30.000 %
Gas temperature at the pump60.000 °C
Gas pressure at the pump (absolute)680.00 mmHg
Pump capacity margin1.1000 -
Pump volumetric efficiency70.000 %

Applying the formula below gives:

ResultValue
Limestone per tonne cane37.481 kg/t
Coke per tonne cane2.9985 kg/t
CO₂ produced per tonne cane24.171 kg/t
CO₂ density at the pump1.4404 kg/m³
Kiln gas at the pump5,593.7 m³/h
CO₂ pump displacement8,790.1 m³/h

Open this example in the calculator and change any input.

Formula

\(m_L = d\frac{M_{CaCO_3}}{M_{CaO}}\frac{k}{p}, \quad m_{CO_2} = m_L\left(p\frac{M_{CO_2}}{M_{CaCO_3}} + c_k C\frac{M_{CO_2}}{M_C}\right), \quad \dot V_p = \frac{A\,m_{CO_2}}{\rho_{CO_2}\,y_{CO_2}}\frac{k_s}{\eta_v}\)

Variables

Symbol Meaning SI unit
\(A\) Crushing rate kg/s
\(d\) CaO per tonne cane kg/kg
\(p\) CaCO₃ in the limestone -
\(k\) Limestone margin -
\(c_k\) Coke per limestone -
\(C\) Carbon in the coke -
\(y_{CO_2}\) CO₂ in the kiln gas at the pump (wet basis) -
\(T_g\) Gas temperature at the pump K
\(p_g\) Gas pressure at the pump (absolute) Pa
\(k_s\) Pump capacity margin -
\(\eta_v\) Pump volumetric efficiency -
\(m_L\) Limestone per tonne cane kg/kg
\(m_k\) Coke per tonne cane kg/kg
\(m_{CO_2}\) CO₂ produced per tonne cane kg/kg
\(\rho_{CO_2}\) CO₂ density at the pump kg/m³
\(\dot V_g\) Kiln gas at the pump m³/s
\(\dot V_p\) CO₂ pump displacement m³/s

Method and standards

Hugot's kiln and pump calculation with exact molar masses.

Where it is used

  • Carbonatation and refinery lime kilns.
  • CO₂ pump sizing.

Common mistakes

  • Taking CaO dose as limestone.
  • Using normal density at the warm pump suction.

Assumptions and limits

  • Complete calcination and combustion (coke burnt fully to CO₂).
  • The CO₂ fraction is on the wet gas at the pump. A dry-basis analyser reading must be reduced by (1 − p_w/p_g) first; using it directly understates the pump volume (about 25 % at 60 °C and 68 cmHg).
  • The limestone margin also scales the coke and the CO₂ produced: the CO₂ from surplus limestone is counted as available gas.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 27
  • lime kiln and CO₂ pump
  • pp. 419–425 (eqns 27.1–27.3 and example)
  • Stoichiometry CaCO₃ → CaO + CO₂
  • C + O₂ → CO₂; ideal-gas CO₂ density

Questions and answers

Where does the CO₂ come from?

From the limestone itself and from burning the coke that heats the kiln; together about 64 kg per 100 kg limestone in Hugot's example.

Why only 25–33 % CO₂?

The nitrogen of the combustion air dilutes the gas; 40 % is the theoretical maximum.

Why such a large pump?

The gas is warm, below atmospheric pressure and mostly nitrogen, and the pump's volumetric efficiency is about 70 %.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.