FireCADCalc

Air Density (Temperature, Humidity, Altitude)

Density of humid air from temperature, relative humidity and site altitude or barometric pressure, with vapour pressure and humidity ratio.

Thermic fluid heatingASME PTC 4 (fired steam generators)IAPWS-IF97 (water and steam)Burner and furnaceFan and blower

Inputs

Examples: Sea level, 20 °C, 50 % RHSea level, 35 °C, 80 % RHSite at 900 m, 30 °C, 60 % RHDry air 0 °C, 1 atmFan inlet at 0.98 bar, 45 °C, 30 % RH

Altitude (ISO 2533 standard atmosphere)

Barometric pressure entered

Results

Density of the humid air1.0344kg/m³
Density of dry air at the same pressure and temperature1.0454kg/m³
Humidity ratio17.922g/kg
Partial pressure of water vapour2.5480kPa
Saturation pressure of water4.2467kPa
Barometric pressure used90.970kPa

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Sea level, 20 °C, 50 % RH. The inputs, in the units selected above:

InputValue
Air temperature (dry bulb)20.000 °C
Relative humidity50.000 %
Pressure fromAltitude (ISO 2533 standard atmosphere)
Site altitude above sea level0 m
Barometric pressure (absolute)1.0132 bar

Applying the formula below gives:

ResultValue
Density of the humid air1.1989 kg/m³
Density of dry air at the same pressure and temperature1.2042 kg/m³
Humidity ratio7.2629 g/kg
Partial pressure of water vapour1.1696 kPa
Saturation pressure of water2.3392 kPa
Barometric pressure used101.33 kPa

Open this example in the calculator and change any input.

Formula

\(p_v = \varphi\,p_{sat}(T) \qquad \rho = \frac{(p - p_v)\,M_{da} + p_v\,M_w}{R\,T} \qquad \rho_{da} = \frac{p\,M_{da}}{R\,T} \qquad W = \frac{M_w}{M_{da}}\cdot\frac{p_v}{p - p_v}\)

Site pressure from the ISO 2533 standard atmosphere:

\(p = p_0\left(1 - \frac{L\,z}{T_0}\right)^{\frac{g\,M_{ISA}}{R^*\,L}}\)

Variables

Symbol Meaning SI unit
\(T\) air temperature (dry bulb) K
\(\varphi\) relative humidity –
\(\text{site}\) pressure from altitude or entered –
\(z\) site altitude above sea level m
\(p_s\) barometric pressure entered Pa
\(\rho\) density of the humid air kg/m³
\(\rho_{da}\) density of dry air at the same pressure and temperature kg/m³
\(W\) humidity ratio, water vapour per kg of dry air kg/kg
\(p_v\) partial pressure of water vapour Pa
\(p_{sat}\) saturation pressure of water at \(T\) Pa
\(p\) barometric pressure used Pa
\(M_{da}\), \(M_w\) molar mass of dry air (about 28.966, computed from the PTC 4 composition) and water (18.015) kg/kmol
\(R\) universal gas constant, 8.314 462 618 J/(mol·K)
\(p_0\), \(T_0\), \(L\), \(M_{ISA}\), \(R^*\), \(g\) ISO 2533 constants: 101 325 Pa, 288.15 K, 0.0065 K/m, 28.964 42 kg/kmol, 8.314 32 J/(mol·K), 9.806 65 m/s² –

Method and standards

Humid air as an ideal mixture of dry air and water vapour (Dalton). Saturation pressure of water from FireCAD's IAPWS-IF97 region 4 equation; dry-air molar mass from the ASME PTC 4-2013 composition with IUPAC atomic weights; site pressure from ISO 2533:1975.

Where it is used

  • Fan sizing at site altitude and temperature.
  • Combustion air and draught calculations.
  • Correcting flow meter readings.

Common mistakes

  • Using sea-level density at a high site.
  • Ignoring humidity in hot, humid climates.
  • Using gauge pressure as absolute.

Assumptions and limits

  • 0 °C to 100 °C (the IF97 saturation line starts at 0 °C; over ice is not covered).
  • Ideal gas, no enhancement factor: the density error is below 0.1 % at atmospheric pressure.
  • Standard-atmosphere pressure is a long-term mean; weather moves the actual pressure by ±2 %.

References

  • ISO 2533:1975 (standard atmosphere)
  • IAPWS R7-97(2012) IF97 (saturation pressure)
  • ASME PTC 4-2013 (dry air composition)

Questions and answers

What is the density of air?

1.199 kg/m³ at 20 °C, 50 % relative humidity and sea-level pressure; 1.292 kg/m³ for dry air at 0 °C. It falls with temperature, altitude and humidity.

Why is humid air lighter than dry air?

Water vapour (18.015 kg/kmol) is lighter than the air it displaces (28.97 kg/kmol). At 35 °C and 80 % humidity the air is 1.7 % lighter than dry air.

How does altitude affect a fan?

At 900 m the standard pressure is 909.7 hPa, about 10 % below sea level. A fan at the same speed moves the same volume but 10 % less mass, with 10 % less pressure and power.

Method and article reviewed by FireCAD engineering on 10 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.