FireCADCalc

Diesel Generator vs Grid Electricity Cost

Cost per kWh of diesel generation from specific fuel consumption, diesel price and running costs, against the grid tariff, with the annual difference.

Inputs

Examples: Typical DG setLight-load DG

From the set's log at its usual load; rises sharply at light load.
2.68 kg/L corresponds to the IPCC 2006 default of 74.1 kg CO₂/GJ at about 36 MJ/L; use your inventory factor if it differs.

Results

The CO₂ factor defaults to 2.68 kg per litre (IPCC 2006 default for diesel); use your inventory factor if it differs.

Diesel cost per kWh41.000
Extra cost per kWh over the grid32.000
Extra cost per year1,600,000
CO₂ from the set53.600t

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Typical DG set. The inputs, in the units selected above:

InputValue
Specific fuel consumption (litres per kWh)0.28000 -
Diesel price per litre90.000 -
Lubricants and maintenance per kWh2.0000 -
Grid tariff per kWh8.0000 -
Energy per year from the set (kWh)200,000 -
CO₂ emission factor of diesel (kg per litre)2.6800 -

Applying the formula below gives:

ResultValue
Diesel cost per kWh27.200
Extra cost per kWh over the grid19.200
Extra cost per year3,840,000
CO₂ from the set150.08 t

Open this example in the calculator and change any input.

Formula

\(c_{DG} = SFC \cdot p_d + c_{om}, \quad \Delta C = (c_{DG} - c_g)E, \quad m_{CO_2} = SFC\cdot E\cdot EF\)

Variables

Symbol Meaning SI unit
\(SFC\) Specific fuel consumption (litres per kWh) -
\(p_d\) Diesel price per litre -
\(c_{om}\) Lubricants and maintenance per kWh -
\(c_g\) Grid tariff per kWh -
\(E\) Energy per year from the set (kWh) -
\(EF\) CO₂ emission factor of diesel (kg per litre) -
\(c_{DG}\) Diesel cost per kWh -
\(\Delta c\) Extra cost per kWh over the grid -
\(\Delta C\) Extra cost per year -
\(m_{CO_2}\) CO₂ from the set kg

Method and standards

Unit cost.

Where it is used

  • Captive power decisions.
  • Energy audits.

Common mistakes

  • Rated SFC at light loads.
  • Forgetting O&M.

Assumptions and limits

  • Average load.
  • CO₂ factor EF defaults to 2.68 kg/L (IPCC 2006 default 74.1 kg CO₂/GJ at about 36 MJ/L).

References

  • Cost per kWh = SFC × diesel price + O&M

Questions and answers

0.28 L/kWh at 90 per litre plus 2 for O&M?

27.2 per kWh, 19.2 more than an 8 tariff.

Why does load matter?

SFC rises sharply below about 40 % load.

Capital?

Add the set's depreciation per kWh if comparing new options.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.