Worked example
Example: Motor at 30 °C. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Reading at 1 minute (MΩ) | 450.00 - |
| Reading at 10 minutes (MΩ) | 1,250.0 - |
| Reading at 30 seconds (MΩ) | 320.00 - |
| Winding temperature during the test | 30.000 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| 1-minute reading corrected to 40 °C (MΩ) | 225.00 |
| Temperature correction factor | 0.50000 |
| Polarisation index R₁₀/R₁ | 2.7778 |
| Dielectric absorption ratio R₆₀/R₃₀ | 1.4062 |
Open this example in the calculator and change any input.
Formula
\(R_{40} = R_T\cdot0.5^{(40 - T)/10}, \quad PI = \frac{R_{10}}{R_1}, \quad DAR = \frac{R_{60}}{R_{30}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(R_{1}\) | Reading at 1 minute (MΩ) | - |
| \(R_{10}\) | Reading at 10 minutes (MΩ) | - |
| \(R_{30s}\) | Reading at 30 seconds (MΩ) | - |
| \(T\) | Winding temperature during the test | K |
| \(R_{40}\) | 1-minute reading corrected to 40 °C (MΩ) | - |
| \(K_T\) | Temperature correction factor | - |
| \(PI\) | Polarisation index R₁₀/R₁ | - |
| \(DAR\) | Dielectric absorption ratio R₆₀/R₃₀ | - |
Method and standards
IEEE 43.
Where it is used
- Motor and generator maintenance.
- Electrician examinations.
Common mistakes
- Testing hot without correction.
- Comparing readings at different voltages.
Assumptions and limits
- DC insulation test.
- Minimum PI of 2.0 for thermal classes B, F and H and 1.5 for class A (IEEE 43); when the corrected 1-minute reading is above 5 000 MΩ the PI may not be meaningful and no PI warning is given.
References
- IEEE Std 43-2013 (insulation resistance testing of rotating machinery): R_40 = R_T × 0.5^((40 − T)/10); PI = R₁₀/R₁; DAR = R₆₀/R₃₀
Questions and answers
450 MΩ at 1 min, 1250 at 10 min, 30 °C?
PI 2.78; corrected to 40 °C about 225 MΩ.
Why correct temperature?
Insulation resistance falls sharply as it warms.
Good PI?
Often 2 or more; your standard sets the limit by insulation class.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.