FireCADCalc

DC Shunt Motor Back EMF, Power, Torque and Speed

Back EMF, developed power and torque of a DC shunt motor from supply voltage, armature current and resistance, and its speed at another armature current.

Thermal power plantProcess steam and utilities

Inputs

Examples: 220 V, 40 A, 0.25 Ω, 1 000 rpm; then 60 A440 V, 100 A, 0.1 Ω, 750 rpm; then 30 A110 V, 15 A, 0.6 Ω, 1 500 rpm; then 25 A

Results

Shunt or separately excited motor with constant field flux; brush drop and armature reaction are neglected.

Back EMF V − I_a R_a210.00V
Power developed E_b I_a8.4000kW
Torque developed80.214N·m
Back EMF at the new current205.00V
Speed at the new current (constant flux)976.19rpm

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 220 V, 40 A, 0.25 Ω, 1 000 rpm; then 60 A. The inputs, in the units selected above:

InputValue
Supply voltage220.00 V
Armature current40.000 A
Armature resistance0.25000 Ω
Speed at that current1,000.0 rpm
New armature current60.000 A

Applying the formula below gives:

ResultValue
Back EMF V − I_a R_a210.00 V
Power developed E_b I_a8.4000 kW
Torque developed80.214 N·m
Back EMF at the new current205.00 V
Speed at the new current (constant flux)976.19 rpm

Open this example in the calculator and change any input.

Formula

\(E_b = V - I_a R_a, \quad P_d = E_b I_a, \quad T = \frac{P_d}{2\pi N}, \quad \frac{N_2}{N_1} = \frac{E_{b2}}{E_{b1}}\)

Variables

Symbol Meaning SI unit
\(V\) Supply voltage V
\(I_a\) Armature current A
\(R_a\) Armature resistance Ω
\(N_1\) Speed at that current 1/s
\(I_{a2}\) New armature current A
\(E_b\) Back EMF V − I_a R_a V
\(P_d\) Power developed E_b I_a W
\(T\) Torque developed N·m
\(E_{b2}\) Back EMF at the new current V
\(N_2\) Speed at the new current (constant flux) 1/s

Method and standards

DC machine voltage and torque equations at constant flux.

Where it is used

  • Electrical examinations.
  • Old DC drives and cranes.

Common mistakes

  • Using rpm in the torque formula.
  • Applying constant flux to series motors.

Assumptions and limits

  • Constant flux; no brush drop. Shunt and separately excited motors only: in a series motor the flux follows the armature current, so the speed relation differs.

References

  • DC machine equations E_b = V − I_a R_a
  • N ∝ E_b / Φ (textbook)

Questions and answers

What is the back EMF of a 220 V motor taking 40 A with 0.25 Ω armature?

210 V; it develops 8.4 kW, 80.2 N·m at 1000 rpm.

What speed at 60 A?

976 rpm: the speed falls with the back EMF.

Why does speed fall so little?

The armature drop is small against the supply voltage.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.