Worked example
Example: 500 kg cotton, 1:8, 2 % reactive. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fabric (dry) | 500.00 kg |
| Liquor ratio (L of bath per kg fabric) | 8.0000 - |
| Dye on weight of fabric | 2.0000 % |
| Salt | 60.000 g/L |
| Soda ash or alkali | 15.000 g/L |
| Bath fill temperature | 25.000 °C |
| Dyeing temperature | 60.000 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| Bath volume | 4,000.0 L |
| Dye | 10.000 kg |
| Salt | 240.00 kg |
| Alkali | 60.000 kg |
| Heat to raise the bath | 608.90 MJ |
Open this example in the calculator and change any input.
Formula
\(V = M\cdot MLR, \quad m_d = d\,M, \quad m_s = c_sV, \quad m_a = c_aV, \quad Q = V\rho c_w(T_2 - T_1) + Mc_f(T_2 - T_1)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M\) | Fabric (dry) | kg |
| \(MLR\) | Liquor ratio (L of bath per kg fabric) | - |
| \(d\) | Dye on weight of fabric | - |
| \(c_s\) | Salt | kg/m³ |
| \(c_a\) | Soda ash or alkali | kg/m³ |
| \(T_1\) | Bath fill temperature | K |
| \(T_2\) | Dyeing temperature | K |
| \(V\) | Bath volume | m³ |
| \(m_d\) | Dye | kg |
| \(m_s\) | Salt | kg |
| \(m_a\) | Alkali | kg |
| \(Q\) | Heat to raise the bath | J |
| \(\rho\) | Bath density, 1000 kg/m³ | kg/m³ |
| \(c_w\) | Specific heat of the bath, 4.1868 kJ/(kg·K) | J/(kg·K) |
| \(c_f\) | Specific heat of the fabric, 1.3 kJ/(kg·K) | J/(kg·K) |
Method and standards
Recipe definitions and sensible heat.
Where it is used
- Dye house recipes and utility budgets.
Common mistakes
- Dosing salt on fabric weight.
- Ignoring fabric moisture.
Assumptions and limits
- Bath density 1 kg/L and water specific heat constant.
- The heat is for the bath and fabric only: the machine's own heat capacity, radiation losses and, for high-temperature polyester dyeing up to 140 °C, the slightly higher specific heat of hot water are not counted, so the real steam demand is higher.
References
- Definitions and mass and energy balances; fabric specific heat taken as 1.3 kJ/(kg·K)
Questions and answers
What is % owf?
Dye as a percentage of the weight of fabric; chemicals are dosed on the bath volume in g/L.
Why does liquor ratio matter?
Water, salt, alkali and heat all scale with it.
What liquor ratio is usual?
Jets 1:5–1:10, winches 1:15–1:20.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.