Worked example
Example: 10 000 m shirting, 6000 ends. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fabric length ordered | 10,000 m |
| Total warp ends | 6,000.0 - |
| Picks per cm | 30.000 - |
| Reed width (weft length per pick) | 1.6000 m |
| Warp tex | 20.000 - |
| Weft tex | 25.000 - |
| Warp crimp | 8.0000 % |
| Process waste allowance | 3.0000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Warp yarn | 1,334.9 kg |
| Weft yarn | 1,236.0 kg |
| Total yarn | 2,570.9 kg |
| Yarn per metre of fabric | 0.25709 kg/m |
Open this example in the calculator and change any input.
Formula
\(M_w = L_f(1 + c_w)n_eT_w(1 + w), \quad M_f = L_fn_pW_rT_f(1 + w)\ \ (T\ \text{in g/km})\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(L_f\) | Fabric length ordered | m |
| \(n_e\) | Total warp ends | - |
| \(n_p\) | Picks per cm | - |
| \(W_r\) | Reed width (weft length per pick) | m |
| \(T_w\) | Warp tex | - |
| \(T_f\) | Weft tex | - |
| \(c_w\) | Warp crimp | - |
| \(w\) | Process waste allowance | - |
| \(M_w\) | Warp yarn | kg |
| \(M_f\) | Weft yarn | kg |
| \(M\) | Total yarn | kg |
| \(M/L_f\) | Yarn per metre of fabric | kg/m |
Method and standards
Yarn length balance.
Where it is used
- Fabric costing and yarn ordering.
Common mistakes
- Using cloth width for weft.
- Forgetting selvedge ends.
Assumptions and limits
- Plain or simple weaves.
- The waste allowance w is added on the net requirement, (1 + w). If w is a share of the yarn issued, the factor is 1/(1 − w), slightly larger.
References
- Definitions: yarn length × linear density
- with warp crimp and waste
Questions and answers
Why use reed width for weft?
Each pick spans the reed width, which already includes the weft crimp.
What waste allowance is usual?
2–4 % for warping, sizing and weaving waste.
Why is warp crimp needed?
The warp is longer than the cloth because it bends over and under the weft.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.