Worked example
Example: 18 000 rpm, 900 TPM, 19.7 tex. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Spindle speed | 18,000 rpm |
| Twists per metre | 900.00 - |
| Yarn linear density (tex = g/km) | 19.700 - |
| Spindles per frame | 1,200.0 - |
| Efficiency | 92.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Delivery speed | 20.000 m/min |
| Production per spindle | 21.749 g/h |
| Production per frame | 26.099 kg/h |
Open this example in the calculator and change any input.
Formula
\(v = \frac{N}{TPM}, \quad p_s = v\,T \times 10^{-6}\,\eta\ (T\ \text{in tex, kg/m} = 10^{-6}\,T), \quad P_f = n_s\,p_s\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(N\) | Spindle speed | 1/s |
| \(TPM\) | Twists per metre | - |
| \(T\) | Yarn linear density (tex = g/km) | - |
| \(n_s\) | Spindles per frame | - |
| \(\eta\) | Efficiency | - |
| \(v\) | Delivery speed | m/s |
| \(p_s\) | Production per spindle | kg/s |
| \(P_f\) | Production per frame | kg/s |
Method and standards
Delivery definition.
Where it is used
- Spinning capacity planning.
Common mistakes
- Using TPI with metres.
- Forgetting doffing time in efficiency.
Assumptions and limits
- Traveller lag neglected.
- Tex is a plain number in g/km; 10⁻⁶ T is the linear density in kg/m.
References
- Definitions and mass and energy balances: delivery = spindle speed / twist per metre
Questions and answers
Why does twist cut production?
Each metre of yarn needs TPM spindle turns, so more twist means slower delivery.
What spindle speeds are usual?
14,000–22,000 rpm for cotton ring frames.
Is traveller lag counted?
No; it reduces actual twist slightly.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.