Worked example
Example: 50 t oil, 2 % FFA, 15 % excess. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crude oil | 50,000 kg |
| Free fatty acids (as oleic) | 2.0000 % |
| Excess caustic (share of theoretical) | 15.000 % |
| Lye strength (NaOH by mass) | 16.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Acid value (mg KOH/g) | 3.9725 |
| Theoretical NaOH | 141.60 kg |
| NaOH with excess | 162.84 kg |
| Lye | 1,017.7 kg |
| Sodium soap formed | 1,077.8 kg |
Open this example in the calculator and change any input.
Formula
\(m_{th} = \frac{M\,FFA}{M_{oleic}}M_{NaOH}, \quad AV = FFA\cdot1000\frac{M_{KOH}}{M_{oleic}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M\) | Crude oil | kg |
| \(FFA\) | Free fatty acids (as oleic) | - |
| \(x\) | Excess caustic (share of theoretical) | - |
| \(c_l\) | Lye strength (NaOH by mass) | - |
| \(AV\) | Acid value (mg KOH/g) | - |
| \(m_{th}\) | Theoretical NaOH | kg |
| \(m_{NaOH}\) | NaOH with excess | kg |
| \(m_{lye}\) | Lye | kg |
| \(m_{soap}\) | Sodium soap formed | kg |
Method and standards
Neutralisation stoichiometry.
Where it is used
- Refinery caustic dosing.
Common mistakes
- Taking FFA as lauric or palmitic without saying so.
- Dosing lye as 100 % NaOH.
Assumptions and limits
- FFA as oleic acid.
- The soap mass is sodium oleate only; neutral oil carried into the soapstock (refining loss) is not estimated.
References
- Definitions and mass and energy balances: RCOOH + NaOH → RCOONa + H₂O with FFA as oleic acid (C₁₈H₃₄O₂); IUPAC masses
Questions and answers
What is acid value?
mg KOH to neutralise 1 g of oil: about 1.99 × FFA% as oleic.
Why excess caustic?
To complete the reaction and remove colour and phosphatides; 10–25 % is usual.
What lye strength?
12–20 % NaOH, depending on oil colour and FFA.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.