Worked example
Example: 40 × 30 per cm, 20/25 tex. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Ends per cm | 40.000 - |
| Picks per cm | 30.000 - |
| Warp yarn tex | 20.000 - |
| Weft yarn tex | 25.000 - |
| Warp crimp | 8.0000 % |
| Weft crimp | 6.0000 % |
| Fabric width | 1.5000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Warp contribution | 86.400 g/m² |
| Weft contribution | 79.500 g/m² |
| Fabric mass per m² | 165.90 g/m² |
| Mass per running metre | 0.24885 kg/m |
Open this example in the calculator and change any input.
Formula
\(G_w = 100\,n_e\,T_w(1 + c_w), \quad G_f = 100\,n_p\,T_f(1 + c_f), \quad G = G_w + G_f, \quad m_l = G\,W\)
With \(n\) per cm (so \(100n\) per m) and \(T\) in tex (g/km = mg/m), \(G\) comes out in mg/m²; divide by 1000 for g/m².
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(n_e\) | Ends per cm | - |
| \(n_p\) | Picks per cm | - |
| \(T_w\) | Warp yarn tex | - |
| \(T_f\) | Weft yarn tex | - |
| \(c_w\) | Warp crimp | - |
| \(c_f\) | Weft crimp | - |
| \(W\) | Fabric width | m |
| \(G_w\) | Warp contribution | kg/m² |
| \(G_f\) | Weft contribution | kg/m² |
| \(G\) | Fabric mass per m² | kg/m² |
| \(m_l\) | Mass per running metre | kg/m |
Method and standards
Yarn mass per unit area.
Where it is used
- Fabric design and costing.
Common mistakes
- Using ends per inch as per cm.
- Ignoring crimp.
Assumptions and limits
- Plain construction; no size or finish.
- Ends and picks are per cm; the factor 100 turns them into threads per metre.
References
- Definitions and mass and energy balances: yarn length per m² × linear density
- with crimp
Questions and answers
Why add crimp?
Yarns interlace, so each metre of fabric holds more than a metre of yarn.
What is 1 tex?
1 g per 1000 m, so 4000 ends/m of 20 tex weigh 80 g/m before crimp.
Is it the greige or finished GSM?
Greige; finishing shrinkage raises GSM.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.