FireCADCalc

Oil Bleaching: Earth Dose and Oil Lost in Spent Earth

Bleaching earth to dose to an oil batch, the oil retained in the spent earth cake, and the bleaching loss as a share of the oil.

Food, dairy and textile

Inputs

Examples: 50 t oil, 1 % earthPalm oil 1.5 %

If you have the oil content of the spent cake c (kg oil per kg cake), enter r = c/(1 − c): 31 % oil in the cake is 0.45 kg per kg of earth.

Results

Steam-blowing the filter cake recovers part of the retained oil.

Bleaching earth500.00kg
Oil lost in spent earth225.00kg
Oil loss share0.45000%
Spent earth cake725.00kg

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 50 t oil, 1 % earth. The inputs, in the units selected above:

InputValue
Oil50,000 kg
Earth dose (share of oil)1.0000 %
Oil retained per kg of fresh earth (not per kg of cake)0.45000 kg/kg

Applying the formula below gives:

ResultValue
Bleaching earth500.00 kg
Oil lost in spent earth225.00 kg
Oil loss share0.45000 %
Spent earth cake725.00 kg

Open this example in the calculator and change any input.

Formula

\(m_e = dM, \quad m_l = r\,m_e\)

Variables

Symbol Meaning SI unit
\(M\) Oil kg
\(d\) Earth dose (share of oil) -
\(r\) Oil retained per kg of fresh earth (not per kg of cake) kg/kg
\(m_e\) Bleaching earth kg
\(m_l\) Oil lost in spent earth kg
\(\lambda\) Oil loss share -
\(m_{cake}\) Spent earth cake kg

Method and standards

Mass definitions.

Where it is used

  • Refinery cost accounting.

Common mistakes

  • Ignoring oil in spent earth.

Assumptions and limits

  • Spent earth cake = earth + retained oil.
  • r is per kg of fresh earth; an oil content of the cake c converts as r = c/(1 − c).

References

  • Definitions and mass and energy balances

Questions and answers

What dose is usual?

0.5–2 % of oil; palm oil and dark oils need more.

How much oil does the earth hold?

About 30–50 % of the earth's mass before steaming.

Is this the whole refining loss?

No: neutralisation and deodorisation add their own losses.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.