FireCADCalc

Flash Fraction and Two-Phase Release of a Superheated Liquid

Fraction of a pressurised liquid that flashes to vapour on release, by the simple and the integrated balance, and the choked two-phase discharge through a hole.

Process steam and utilitiesDistillery and ethanolRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: Liquid propane at 25 °C, 25 mm holeAmmonia at 20 °C, 10 mmButane at 30 °C

Results

The flashing liquid also carries off spray: the airborne mass is often taken as about twice the flash fraction. The two-phase flux is the equilibrium rate model for discharge through holes or pipes longer than about 10 cm; a sharp hole in a thin wall passes more, nearer the liquid rate.

A screening estimate for training and early design, not a hazard or risk study.

Flash fraction (simple balance)18.303%
Flash fraction (integrated, constant latent heat)16.725%
Two-phase mass flux (equilibrium, choked)8,978.1kg/(m²·s)
Two-phase discharge rate0.70514kg/s

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Liquid propane at 25 °C, 25 mm hole. The inputs, in the units selected above:

InputValue
Liquid temperature in the vessel25.000 °C
Normal boiling point-42.050 °C
Mean liquid heat capacity2.6000 kJ/(kg·K)
Latent heat at the boiling point426.00 kJ/kg
Change in specific volume on vaporisation (v_g − v_f) at the vessel condition0.040000 m³/kg
Hole diameter25.400 mm

Applying the formula below gives:

ResultValue
Flash fraction (simple balance)40.923 %
Flash fraction (integrated, constant latent heat)33.584 %
Two-phase mass flux (equilibrium, choked)12,096 kg/(m²·s)
Two-phase discharge rate6.1292 kg/s

Open this example in the calculator and change any input.

Formula

\(f_v = \frac{\bar C_p(T_0 - T_b)}{\Delta H_v}, \quad f_v = 1 - \exp\left[-\frac{\bar C_p(T_0 - T_b)}{\Delta H_v}\right], \quad Q_m = A\frac{\Delta H_v}{v_{fg}}\sqrt{\frac{1}{\bar C_pT_0}}\)

Variables

Symbol Meaning SI unit
\(T_0\) Liquid temperature in the vessel K
\(T_b\) Normal boiling point K
\(\bar C_p\) Mean liquid heat capacity J/(kg·K)
\(\Delta H_v\) Latent heat at the boiling point J/kg
\(v_{fg}\) Change in specific volume on vaporisation (v_g − v_f) at the vessel condition m³/kg
\(d\) Hole diameter m
\(f_v\) Flash fraction (simple balance) -
\(G\) Two-phase mass flux (equilibrium, choked) kg/(m²·s)
\(Q_m\) Two-phase discharge rate kg/s

Method and standards

Energy balance on adiabatic flashing and the equilibrium two-phase discharge (Fauske and Epstein) as given by Crowl and Louvar.

Where it is used

  • LPG, ammonia and chlorine release scenarios.
  • Sizing catch tanks and estimating cloud size.

Common mistakes

  • Using the vessel pressure boiling point instead of the normal boiling point.
  • Ignoring spray carried with the flash.

Assumptions and limits

  • Adiabatic flashing; equilibrium flow.

References

  • Crowl and Louvar
  • Chemical Process Safety: Fundamentals with Applications
  • 2nd ed. (Prentice Hall, 2002)
  • ch. 4
  • eqs. 4-90
  • 4-93 and 4-104 (Fauske and Epstein equilibrium rate model)

Questions and answers

Why two flash fractions?

The simple balance assumes constant heat capacity and latent heat for the whole drop in temperature; the integrated form accounts for the liquid cooling as it flashes and is always a little lower.

Where do I get v_fg?

From the liquid and saturated vapour densities at the vessel temperature: v_fg = 1/ρ_v − 1/ρ_l.

What do the defaults represent?

Liquid propane at 25 °C (boiling point −42 °C) leaking through a 25 mm hole.

Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.