FireCADCalc

Oil Well Rate and Productivity Index (Radial Darcy Flow)

Oil well rate and productivity index from permeability, net pay, drawdown, viscosity, formation volume factor, drainage and well radius and skin.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: Ahmed example, steady statePseudo-steady, skin 3Stimulated well, skin -2

Results

Single-phase oil above the bubble point, homogeneous reservoir, centred well. Below the bubble point gas comes out of solution: use Vogel's inflow relation. J in the first output is in SI (m³/s per Pa).

Oil rate (stock tank)1,173.1bbl/d
Productivity index2.0873e-10
Productivity index (stock-tank m³/d per bar)1.8034

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Ahmed example, steady state. The inputs, in the units selected above:

InputValue
Permeability120.00 mD
Net pay thickness7.6200 m
Reservoir pressure (average or at the drainage boundary)2,506.0 psi
Flowing bottom-hole pressure1,800.0 psi
Oil viscosity2.5000 cP
Oil formation volume factor1.2500 -
Drainage radius227.08 m
Wellbore radius0.076200 m
Skin factor0 -
Flow regimeSteady state (constant boundary pressure)

Applying the formula below gives:

ResultValue
Oil rate (stock tank)600.00 bbl/d
Productivity index2.2682e-10
Productivity index (stock-tank m³/d per bar)1.9597

Open this example in the calculator and change any input.

Formula

\(q_o = \frac{2\pi kh(\bar p - p_{wf})}{\mu_oB_o\left[\ln\frac{r_e}{r_w} - 0.75 + s\right]}\ \text{(pseudo-steady)}, \quad J = \frac{q_o}{\bar p - p_{wf}}\)

Variables

Symbol Meaning SI unit
\(k\) Permeability m²
\(h\) Net pay thickness m
\(\bar p\) Reservoir pressure (average or at the drainage boundary) Pa
\(p_{wf}\) Flowing bottom-hole pressure Pa
\(\mu_o\) Oil viscosity Pa·s
\(B_o\) Oil formation volume factor -
\(r_e\) Drainage radius m
\(r_w\) Wellbore radius m
\(s\) Skin factor -
\(\text{regime}\) Flow regime -
\(q_o\) Oil rate (stock tank) m³/s
\(J\) Productivity index -

Method and standards

Darcy's law for radial flow in SI units (Ahmed's field form uses 0.00708 kh/(μB) with k in mD, h in ft, p in psi and q in STB/d).

Where it is used

  • Well test interpretation and rate forecasts.
  • Artificial-lift design.

Common mistakes

  • Using it below the bubble point.
  • Ignoring skin.

Assumptions and limits

  • Single-phase, homogeneous, radial drainage.

References

  • Ahmed
  • Reservoir Engineering Handbook
  • 5th ed. (Gulf Professional Publishing, 2019)
  • ch. 6
  • eqs. 6-27 and 6-149 (radial flow, skin)

Questions and answers

What does skin mean?

Extra pressure drop near the well: positive for damage, negative for stimulation such as acidising or fractures.

Steady or pseudo-steady state?

Steady state holds with pressure support at the boundary (water drive); pseudo-steady state for a closed drainage area, using average pressure.

What do the defaults represent?

Ahmed's example: 120 mD, 25 ft pay, 2,506 to 1,800 psia, 2.5 cP oil with B_o 1.25, 745 ft drainage radius and a 0.25 ft well.

Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.