Worked example
Example: Ahmed example, steady state. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Permeability | 120.00 mD |
| Net pay thickness | 7.6200 m |
| Reservoir pressure (average or at the drainage boundary) | 2,506.0 psi |
| Flowing bottom-hole pressure | 1,800.0 psi |
| Oil viscosity | 2.5000 cP |
| Oil formation volume factor | 1.2500 - |
| Drainage radius | 227.08 m |
| Wellbore radius | 0.076200 m |
| Skin factor | 0 - |
| Flow regime | Steady state (constant boundary pressure) |
Applying the formula below gives:
| Result | Value |
|---|---|
| Oil rate (stock tank) | 600.00 bbl/d |
| Productivity index | 2.2682e-10 |
| Productivity index (stock-tank m³/d per bar) | 1.9597 |
Open this example in the calculator and change any input.
Formula
\(q_o = \frac{2\pi kh(\bar p - p_{wf})}{\mu_oB_o\left[\ln\frac{r_e}{r_w} - 0.75 + s\right]}\ \text{(pseudo-steady)}, \quad J = \frac{q_o}{\bar p - p_{wf}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(k\) | Permeability | m² |
| \(h\) | Net pay thickness | m |
| \(\bar p\) | Reservoir pressure (average or at the drainage boundary) | Pa |
| \(p_{wf}\) | Flowing bottom-hole pressure | Pa |
| \(\mu_o\) | Oil viscosity | Pa·s |
| \(B_o\) | Oil formation volume factor | - |
| \(r_e\) | Drainage radius | m |
| \(r_w\) | Wellbore radius | m |
| \(s\) | Skin factor | - |
| \(\text{regime}\) | Flow regime | - |
| \(q_o\) | Oil rate (stock tank) | m³/s |
| \(J\) | Productivity index | - |
Method and standards
Darcy's law for radial flow in SI units (Ahmed's field form uses 0.00708 kh/(μB) with k in mD, h in ft, p in psi and q in STB/d).
Where it is used
- Well test interpretation and rate forecasts.
- Artificial-lift design.
Common mistakes
- Using it below the bubble point.
- Ignoring skin.
Assumptions and limits
- Single-phase, homogeneous, radial drainage.
References
- Ahmed
- Reservoir Engineering Handbook
- 5th ed. (Gulf Professional Publishing, 2019)
- ch. 6
- eqs. 6-27 and 6-149 (radial flow, skin)
Questions and answers
What does skin mean?
Extra pressure drop near the well: positive for damage, negative for stimulation such as acidising or fractures.
Steady or pseudo-steady state?
Steady state holds with pressure support at the boundary (water drive); pseudo-steady state for a closed drainage area, using average pressure.
What do the defaults represent?
Ahmed's example: 120 mD, 25 ft pay, 2,506 to 1,800 psia, 2.5 cP oil with B_o 1.25, 745 ft drainage radius and a 0.25 ft well.
Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.