FireCADCalc

Crude Oil Viscosity: Dead, Saturated and Undersaturated

Dead-oil and gas-saturated crude viscosity by Beggs–Robinson, and undersaturated viscosity above the bubble point by Vasquez–Beggs.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 35 °API, 180 °F, 500 scf/STB, above p_bSaturated, 25 °API, 150 °FDead heavy oil

Results

At or below the bubble point the oil is saturated: μ_o = μ_ob at the entered R_s (R_s should be the solution GOR at this pressure).

Beggs–Robinson: reported standard deviation about 14 % (dead) and 27 % (live); measured data are always better.

Dead-oil viscosity8.7837cP
Saturated (live) oil viscosity2.4965cP
Oil viscosity at the pressure2.4965cP

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 35 °API, 180 °F, 500 scf/STB, above p_b. The inputs, in the units selected above:

InputValue
Oil gravity35.000 -
Temperature82.406 °C
Solution gas-oil ratio500.00 scf/STB
Pressure (absolute)3,000.0 psi
Bubble-point pressure (absolute)2,500.0 psi

Applying the formula below gives:

ResultValue
Dead-oil viscosity2.1833 cP
Saturated (live) oil viscosity0.63955 cP
Oil viscosity at the pressure0.67136 cP

Open this example in the calculator and change any input.

Formula

\(\mu_{od} = 10^{x} - 1,\ x = 10^{3.0324 - 0.02023\,\text{API}}(T - 460)^{-1.163}, \quad \mu_{ob} = a\mu_{od}^{b}\)

\(a = 10.715(R_s + 100)^{-0.515},\ b = 5.44(R_s + 150)^{-0.338}, \quad \mu_o = \mu_{ob}\left(\frac{p}{p_b}\right)^m,\ m = 2.6p^{1.187}10^{-3.9\times10^{-5}p - 5}\)

Variables

Symbol Meaning SI unit
\(\text{API}\) Oil gravity -
\(T\) Temperature K
\(R_s\) Solution gas-oil ratio m³/m³
\(p\) Pressure (absolute) Pa
\(p_b\) Bubble-point pressure (absolute) Pa
\(\mu_{od}\) Dead-oil viscosity Pa·s
\(\mu_{ob}\) Saturated (live) oil viscosity Pa·s
\(\mu_o\) Oil viscosity at the pressure Pa·s

Method and standards

Beggs–Robinson (1975) and Vasquez–Beggs (1980) in field units (cP, °R, psia, scf/STB).

Where it is used

  • Well inflow and flowline calculations.
  • Pump and pipeline design for crude.

Common mistakes

  • Using dead-oil viscosity for reservoir flow.
  • Extrapolating far beyond the data (API 16–58, 70–295 °F).

Assumptions and limits

  • Black-oil correlations.

References

  • Ahmed
  • Reservoir Engineering Handbook
  • 5th ed. (Gulf Professional Publishing, 2019)
  • ch. 2
  • eqs. 2-117
  • 2-120 and 2-121

Questions and answers

Why does gas lower oil viscosity?

Dissolved light gas thins the oil; a live oil can be several times less viscous than the same oil degassed.

Why does viscosity rise above the bubble point?

No more gas dissolves, so extra pressure only compresses the liquid.

What do the defaults represent?

A 35 °API oil at 180 °F with 500 scf/STB, at 3,000 psia against a 2,500 psia bubble point.

Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.