Worked example
Example: 35 °API, 180 °F, 500 scf/STB, above p_b. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Oil gravity | 35.000 - |
| Temperature | 82.406 °C |
| Solution gas-oil ratio | 500.00 scf/STB |
| Pressure (absolute) | 3,000.0 psi |
| Bubble-point pressure (absolute) | 2,500.0 psi |
Applying the formula below gives:
| Result | Value |
|---|---|
| Dead-oil viscosity | 2.1833 cP |
| Saturated (live) oil viscosity | 0.63955 cP |
| Oil viscosity at the pressure | 0.67136 cP |
Open this example in the calculator and change any input.
Formula
\(\mu_{od} = 10^{x} - 1,\ x = 10^{3.0324 - 0.02023\,\text{API}}(T - 460)^{-1.163}, \quad \mu_{ob} = a\mu_{od}^{b}\)
\(a = 10.715(R_s + 100)^{-0.515},\ b = 5.44(R_s + 150)^{-0.338}, \quad \mu_o = \mu_{ob}\left(\frac{p}{p_b}\right)^m,\ m = 2.6p^{1.187}10^{-3.9\times10^{-5}p - 5}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{API}\) | Oil gravity | - |
| \(T\) | Temperature | K |
| \(R_s\) | Solution gas-oil ratio | m³/m³ |
| \(p\) | Pressure (absolute) | Pa |
| \(p_b\) | Bubble-point pressure (absolute) | Pa |
| \(\mu_{od}\) | Dead-oil viscosity | Pa·s |
| \(\mu_{ob}\) | Saturated (live) oil viscosity | Pa·s |
| \(\mu_o\) | Oil viscosity at the pressure | Pa·s |
Method and standards
Beggs–Robinson (1975) and Vasquez–Beggs (1980) in field units (cP, °R, psia, scf/STB).
Where it is used
- Well inflow and flowline calculations.
- Pump and pipeline design for crude.
Common mistakes
- Using dead-oil viscosity for reservoir flow.
- Extrapolating far beyond the data (API 16–58, 70–295 °F).
Assumptions and limits
- Black-oil correlations.
References
- Ahmed
- Reservoir Engineering Handbook
- 5th ed. (Gulf Professional Publishing, 2019)
- ch. 2
- eqs. 2-117
- 2-120 and 2-121
Questions and answers
Why does gas lower oil viscosity?
Dissolved light gas thins the oil; a live oil can be several times less viscous than the same oil degassed.
Why does viscosity rise above the bubble point?
No more gas dissolves, so extra pressure only compresses the liquid.
What do the defaults represent?
A 35 °API oil at 180 °F with 500 scf/STB, at 3,000 psia against a 2,500 psia bubble point.
Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.