Worked example
Example: FCC 60 µm, 10 % fines. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mean particle diameter (surface-volume) | 0.060000 mm |
| Particle density | 1,500.0 kg/m³ |
| Gas density | 1.2000 kg/m³ |
| Gas viscosity | 0.018000 cP |
| Mass fraction finer than 45 µm | 10.000 % |
| Minimum fluidisation velocity | 0.002000 m/s |
| Terminal velocity of particles 2.7 × mean size | 0.50000 m/s |
Applying the formula below gives:
| Result | Value |
|---|---|
| Ratio U_mb/U_mf | 2.5501 |
| Minimum bubbling velocity | 0.005100 m/s |
| Maximum stable bubble size | 0.050986 m |
Open this example in the calculator and change any input.
Formula
\(\frac{U_{mb}}{U_{mf}} = \frac{2300\mu^{0.523}\rho_g^{0.126}e^{0.716F}}{d_p^{0.8}g^{0.934}(\rho_p - \rho_g)^{0.934}}, \quad U_{mb} = \max\left(\frac{U_{mb}}{U_{mf}}, 1\right) U_{mf}, \quad D_{b,max} = \frac{2U_t^{*2}}{g}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(d_p\) | Mean particle diameter (surface-volume) | m |
| \(\rho_p\) | Particle density | kg/m³ |
| \(\rho_g\) | Gas density | kg/m³ |
| \(\mu\) | Gas viscosity | Pa·s |
| \(F\) | Mass fraction finer than 45 µm | - |
| \(U_{mf}\) | Minimum fluidisation velocity | m/s |
| \(U_t^*\) | Terminal velocity of particles 2.7 × mean size | m/s |
| \(U_{mb}/U_{mf}\) | Ratio U_mb/U_mf | - |
| \(U_{mb}\) | Minimum bubbling velocity | m/s |
| \(D_{b,max}\) | Maximum stable bubble size | m |
| \(g\) | standard gravity, 9.80665 | m/s² |
Method and standards
Basu's Eqs. (2.4) and (2.5). U_mf is your input; a note compares it with the Wen and Yu (1966) value for the same particle and gas.
Where it is used
- Bed material checks.
- Pilot plant interpretation.
Common mistakes
- Using for Group B solids (ratio below 1).
Assumptions and limits
- SI units throughout.
- The Abrahamsen and Geldart ratio applies to Group A powders; for Group B and D solids the ratio comes out below 1 and U_mb is taken equal to U_mf. The Geldart group is not checked.
- U_mb is only as good as the U_mf entered.
References
- Basu
- Circulating Fluidized Bed Boilers: Design
- Operation and Maintenance (Springer, 2015)
- ch. 2
- Eqs. (2.4) (Abrahamsen and Geldart 1980) and (2.5) (Grace 1982)
Questions and answers
Why does only Group A have U_mb > U_mf?
Fine, light powders expand smoothly before bubbles form; coarser solids bubble as soon as they fluidise.
What does fines fraction do?
Fines below 45 µm widen the smooth-expansion range (the exp(0.716F) term).
How big can bubbles get?
Until their rise velocity matches the terminal velocity of 2.7 × mean-size particles.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.