FireCADCalc

CFB Solid Residue: Spent Sorbent, Bed Drain and Fly Ash Capacity

Total solid residue of a CFB boiler from fuel ash and spent limestone (CaSO₄, free CaO, inerts), and design capacities for bed drain and fly ash handling (Basu).

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationPulp and paper

Inputs

Examples: 30 t/h coal, 30 % ash, 0.8 % S, Ca/S 2.2Lignite 100 t/h, 15 % ash, 3 % S, Ca/S 2.5

Basu designs the fly ash equipment for 90 % of the total solids.

Results

Basu: the actual bed drain share varies from 5 to 70 % (about 20 % for bituminous coal); design the drain for 50–70 % of the total and fly ash equipment for 90 %, each with a 20–30 % margin. Limestone inerts taken as non-volatile; unburnt carbon is not included.

Limestone feed26.607t/h
CaSO₄ formed11.720t/h
Free CaO8.2909t/h
Total solid residue38.203t/h
Bed drain design capacity34.765t/h
Fly ash system design capacity44.698t/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 30 t/h coal, 30 % ash, 0.8 % S, Ca/S 2.2. The inputs, in the units selected above:

InputValue
Fuel feed30.000 t/h
Ash in fuel, as fired30.000 %
Sulphur in fuel, as fired0.80000 %
Ca/S molar ratio2.2000 -
Sulphur capture90.000 %
CaCO₃ in limestone90.000 %
Bed drain design share of total solids60.000 %
Fly ash design share of total solids90.000 %
Capacity margin25.000 %

Applying the formula below gives:

ResultValue
Limestone feed1.8315 t/h
CaSO₄ formed0.91718 t/h
Free CaO0.54573 t/h
Total solid residue10.646 t/h
Bed drain design capacity7.9845 t/h
Fly ash system design capacity11.977 t/h

Open this example in the calculator and change any input.

Formula

\(\dot n_S = \frac{\dot m_fS}{32.06}, \quad \dot m_{ls} = \frac{(Ca/S)\dot n_S\,100.09}{x_{CaCO_3}}, \quad \dot m_{CaSO_4} = \eta_S\dot n_S\,136.14, \quad \dot m_{CaO} = (Ca/S - \eta_S)\dot n_S\,56.08\)

\(\dot m_{res} = \dot m_fA + \dot m_{CaSO_4} + \dot m_{CaO} + \dot m_{ls}(1 - x_{CaCO_3})\)

Variables

Symbol Meaning SI unit
\(\dot m_f\) Fuel feed kg/s
\(A\) Ash in fuel -
\(S\) Sulphur in fuel -
\(Ca/S\) Ca/S molar ratio -
\(\eta_S\) Sulphur capture -
\(x_{CaCO_3}\) CaCO₃ in limestone -
\(f_{bd}\) Bed drain design share of total solids -
\(f_{fa}\) Fly ash design share of total solids (Basu: 90 %) -
\(m\) Capacity margin -
\(\dot m_{ls}\) Limestone feed kg/s
\(\dot m_{CaSO_4}\) CaSO₄ formed kg/s
\(\dot m_{CaO}\) Free CaO kg/s
\(\dot m_{res}\) Total solid residue kg/s
\(\dot m_{bd}\) Bed drain design capacity kg/s
\(\dot m_{fa}\) Fly ash system design capacity kg/s
\(\dot m_{bd}\), \(\dot m_{fa}\) \(= \dot m_{res}\,f\,(1 + m)\) with \(f = f_{bd}\) or \(f_{fa}\) kg/s

Method and standards

Stoichiometric residue balance with Basu's design shares; molar masses from IUPAC atomic weights (S 32.06, CaCO₃ 100.09, CaSO₄ 136.13, CaO 56.08 kg/kmol).

Where it is used

  • CFB ash handling and silo sizing.
  • Limestone and residue logistics.

Common mistakes

  • Sizing ash systems on fuel ash only.
  • Using the typical split without margin.

Assumptions and limits

  • Complete calcination; CaSO₄ the only sulphur product.
  • Unburnt carbon in the residue is not included, so the residue is somewhat understated for fuels with high carbon loss.
  • Everything in the limestone that is not CaCO₃ is taken as a non-volatile inert. MgCO₃ in dolomitic limestone loses its CO₂, so the residue is then slightly overstated.
  • Ash and sulphur are on the as-fired basis of the fuel feed.

References

  • Basu
  • Circulating Fluidized Bed Boilers: Design
  • Operation and Maintenance (Springer, 2015)
  • ch. 6
  • Bed Drain Capacity and sec. 6.5.7 (ash split) and the CaCO₃–CaSO₄ stoichiometry

Questions and answers

Why is CFB residue larger than the fuel ash?

Spent limestone adds CaSO₄, free CaO and limestone inerts; at Ca/S 2–2.5 it can equal the fuel ash itself in high-sulphur fuels.

How is ash split between bed and fly ash?

It depends on fuel ash particle size and attrition; most passes the cyclone as fly ash, so both systems are designed with wide margins.

What do the defaults give?

30 t/h of 30 % ash, 0.8 % S coal at Ca/S 2.2: about 1.8 t/h of limestone and 10.6 t/h of total residue.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.