FireCADCalc

Fusel Oil and Impurity Draws per Day

Fusel oil, heads (technical alcohol) and other draws per day from the plant capacity and each draw's share of absolute alcohol.

Distillery and ethanol

Inputs

Examples: 100 KLPDENA plant

Results

Fusel oil draw per day, as absolute alcohol0.24000m³/d
Heads draw per day, as absolute alcohol2.4000m³/d
Main product per day57.360kL/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 KLPD. The inputs, in the units selected above:

InputValue
Plant capacity (absolute alcohol)100.00 kL/d
Fusel oil draw (% of AA)0.30000 %
Heads / technical alcohol draw (% of AA)2.0000 %

Applying the formula below gives:

ResultValue
Fusel oil draw per day, as absolute alcohol0.30000 m³/d
Heads draw per day, as absolute alcohol2.0000 m³/d
Main product per day97.700 kL/d

Open this example in the calculator and change any input.

Formula

\(\dot V_o = \dot V_e f_o, \quad \dot V_m = \dot V_e (1 - f_o - f_t)\)

Variables

Symbol Meaning SI unit
\(\dot V_e\) Plant capacity (absolute alcohol) m³/s
\(f_o\) Fusel oil draw (% of AA) -
\(f_t\) Heads / technical alcohol draw (% of AA) -
\(\dot V_o\) Fusel oil per day m³/s
\(\dot V_t\) Heads per day m³/s
\(\dot V_m\) Main product per day m³/s

Method and standards

Balance.

Where it is used

  • Production planning.
  • By-product reports.

Common mistakes

  • Draws taken on bulk volume.

Assumptions and limits

  • Ratios on absolute alcohol, so the draws are expressed as absolute alcohol. Fusel oil is mostly higher alcohols and water, so its bulk volume differs from this figure.

References

  • Mass balance on absolute alcohol; draw ratios from plant practice

Questions and answers

What is fusel oil?

Higher alcohols (amyl, butyl, propyl) formed by yeast from amino acids.

Why draw it off?

It accumulates in the rectifier and spoils product quality if left.

Is it saleable?

Yes, as a solvent feedstock.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.