Worked example
Example: 100 N m. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Torque (choose its unit) | 100.00 N·m |
Applying the formula below gives:
| Result | Value |
|---|---|
| newton metre | 100.00 N·m |
| kilonewton metre | 0.10000 kN·m |
| newton millimetre | 100,000 N·mm |
| kilogram-force metre | 10.197 kgf·m |
| kilogram-force centimetre | 1,019.7 kgf·cm |
| pound-force foot | 73.756 lbf·ft |
| pound-force inch | 885.07 lbf·in |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Torque (choose its unit) | N·m |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
100 N·m in lbf·ft?
About 73.76 lbf·ft.
kgf·m?
1 kgf·m = 9.80665 N·m.
Torque wrenches?
Often in N·m and lbf·ft on twin scales.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.