Worked example
Example: One metre. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Length (choose its unit) | 1.0000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| metre | 1.0000 m |
| millimetre | 1,000.0 mm |
| micrometre (micron) | 1,000,000 µm |
| centimetre | 100.00 cm |
| kilometre | 0.001000 km |
| inch | 39.370 in |
| foot | 3.2808 ft |
| yard | 1.0936 yd |
| mile | 6.2137e-04 mi |
| nautical mile | 5.3996e-04 nmi |
| mil (thou) | 39,370 mil |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Length (choose its unit) | m |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
How many millimetres in an inch?
Exactly 25.4.
A mile?
1609.344 m exactly; a nautical mile is 1852 m.
A mil?
One thousandth of an inch: 25.4 µm, used for coatings and clearances.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.