FireCADCalc

Volume Flow Unit Converter (m³/h, L/min, gpm, cfm, MLD)

Convert a volume flow between m³/s, m³/h, m³/min, m³/day, ML/day, litres per second and per minute, US and imperial gallons per minute, cfm and cubic feet per hour.

PumpFan and blower

Inputs

Examples: 100 m³/h500 US gpm2 MLD

Results

A volume flow of a gas depends on its pressure and temperature; convert gas flows to normal conditions with the gas flow normal/actual calculator.

cubic metre per second0.027778m³/s
cubic metre per hour100.00m³/h
cubic metre per minute1.6667m³/min
cubic metre per day2,400.0m³/d
megalitre per day (MLD)2.4000ML/d
litre per second27.778L/s
litre per minute (LPM)1,666.7L/min
US gallon per minute440.29US gal/min
imperial gallon per minute366.62imp gal/min
cubic foot per minute (cfm)58.858ft³/min
cubic foot per hour3,531.5ft³/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 m³/h. The inputs, in the units selected above:

InputValue
Volume flow (choose its unit)100.00 m³/h

Applying the formula below gives:

ResultValue
cubic metre per second0.027778 m³/s
cubic metre per hour100.00 m³/h
cubic metre per minute1.6667 m³/min
cubic metre per day2,400.0 m³/d
megalitre per day (MLD)2.4000 ML/d
litre per second27.778 L/s
litre per minute (LPM)1,666.7 L/min
US gallon per minute440.29 US gal/min
imperial gallon per minute366.62 imp gal/min
cubic foot per minute (cfm)58.858 ft³/min
cubic foot per hour3,531.5 ft³/h

Open this example in the calculator and change any input.

Formula

\(1\ \text{US gal} = 231\ \text{in}^3 = 3.785\,411\,784\ \text{L}, \quad 1\ \text{imp gal} = 4.546\,09\ \text{L}\)

\(1\ \text{ft}^3/\text{min} = 1.699\,011\ \text{m}^3/\text{h}\)

Variables

Symbol Meaning SI unit
\(Q\) Volume flow (choose its unit) m³/s

Method and standards

Exact definitions of the gallon and the foot (NIST SP 811).

Where it is used

  • Pump and fan duties across US, UK and metric data.
  • Water and wastewater plants in MLD.
  • Compressed air in cfm.

Common mistakes

  • Mixing gauge and absolute values.
  • Rounding a factor early and carrying the error.
  • Converting a difference with an offset (temperatures).
  • Mixing US and imperial gallons.

Assumptions and limits

  • Volume flows of gases depend on pressure and temperature; this converts units only.

References

  • NIST SP 811 (2008)
  • Appendix B conversion factors

Questions and answers

How many m³/h is 1 US gpm?

0.2271 m³/h (3.785 L/min). An imperial gallon per minute is 0.2728 m³/h.

What is 2 MLD in m³/h?

83.3 m³/h (2000 m³ a day).

How many m³/h is 1 cfm?

1.699 m³/h.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.