Worked example
Example: 1 kN. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Force (choose its unit) | 1,000.0 N |
Applying the formula below gives:
| Result | Value |
|---|---|
| newton | 1,000.0 N |
| kilonewton | 1.0000 kN |
| meganewton | 0.001000 MN |
| kilogram-force | 101.97 kgf |
| tonne-force | 0.10197 tf |
| pound-force | 224.81 lbf |
| kip (1000 lbf) | 0.22481 kip |
| dyne | 1.0000e+08 dyn |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Force (choose its unit) | N |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
1 kgf in newtons?
9.80665 N exactly (standard gravity).
Crane 'tonnes'?
A 10 t capacity is about 98 kN of load.
A kip?
1000 lbf, about 4.448 kN.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.