FireCADCalc

Mass Flow Unit Converter (kg/s, kg/h, t/h, lb/h)

Convert a mass flow between kilograms per second and per hour, tonnes per hour and per day, kilograms per day and pounds per hour and per second.

Inputs

Examples: 10 kg/s100 t/h

Results

kg/s × 3.6 = t/h.

kilogram per second10.000kg/s
kilogram per hour36,000kg/h
kilogram per day864,000kg/d
tonne per hour (TPH)36.000t/h
tonne per day864.00t/d
pound per hour79,366lb/h
pound per second22.046lb/s

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 kg/s. The inputs, in the units selected above:

InputValue
Mass flow (choose its unit)10.000 kg/s

Applying the formula below gives:

ResultValue
kilogram per second10.000 kg/s
kilogram per hour36,000 kg/h
kilogram per day864,000 kg/d
tonne per hour (TPH)36.000 t/h
tonne per day864.00 t/d
pound per hour79,366 lb/h
pound per second22.046 lb/s

Open this example in the calculator and change any input.

Formula

\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)

Variables

Symbol Meaning SI unit
\(x\) Mass flow (choose its unit) kg/s

Method and standards

Each unit's factor to the SI unit is held once in the unit registry.

Where it is used

  • Reading foreign drawings and data sheets.
  • Examinations and everyday engineering.

Common mistakes

  • Mixing similar units (US and imperial).
  • Rounding factors too early.

Assumptions and limits

  • Exact factors where the definition is exact.

References

  • Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)

Questions and answers

10 kg/s in t/h?

36 t/h.

Steam boilers in TPH?

Tonnes of steam per hour: divide by 3.6 for kg/s.

lb/h?

1 t/h is about 2204.6 lb/h.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.