Worked example
Example: 10 m/s. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Speed (choose its unit) | 10.000 m/s |
Applying the formula below gives:
| Result | Value |
|---|---|
| metre per second | 10.000 m/s |
| kilometre per hour | 36.000 km/h |
| metre per minute | 600.00 m/min |
| foot per second | 32.808 ft/s |
| foot per minute | 1,968.5 ft/min |
| mile per hour | 22.369 mph |
| knot | 19.438 kn |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Speed (choose its unit) | m/s |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
10 m/s in km/h?
36 km/h.
Duct velocities in ft/min?
1 m/s is about 196.85 ft/min.
A knot?
One nautical mile per hour, 0.5144 m/s.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.