Worked example
Example: 1500 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Rotational speed (choose its unit) | 1,500.0 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Revolutions per minute | 1,500.0 rpm |
| Revolutions per second | 25.000 Hz |
| Angular velocity | 157.08 rad/s |
| Degrees per second | 9,000.0 |
Open this example in the calculator and change any input.
Formula
\(\omega = 2\pi N, \quad f = N\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(N\) | Rotational speed (choose its unit) | 1/s |
| \(f\) | Revolutions per second | 1/s |
| \(\omega\) | Angular velocity (rad/s) | - |
| \(\dot\theta\) | Degrees per second | - |
Method and standards
Definitions.
Where it is used
- Shaft power and vibration work.
- Examinations.
Common mistakes
- Using rpm in P = Tω.
- Confusing Hz of supply with shaft speed.
Assumptions and limits
- Steady rotation.
References
- ω = 2πN (N in revolutions per second)
Questions and answers
1500 rpm?
25 rev/s, 157.08 rad/s.
Power from torque?
P = T ω with ω in rad/s.
Motor poles?
See the motor speed and slip calculator.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.