Worked example
Example: 10 K. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Temperature difference (choose its unit) | 10.000 K |
Applying the formula below gives:
| Result | Value |
|---|---|
| kelvin | 10.000 K |
| degree Celsius (difference) | 10.000 °C |
| degree Fahrenheit (difference) | 18.000 °F |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Temperature difference (choose its unit) | K |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
A 10 K rise in °F?
18 °F: differences use only the 9/5 factor.
Why not add 32?
The offset cancels in a difference.
Kelvin vs °C?
A step of 1 K equals a step of 1 °C.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.