Worked example
Example: One radian. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Angle (choose its unit) | 1.0000 rad |
Applying the formula below gives:
| Result | Value |
|---|---|
| radian | 1.0000 rad |
| degree | 57.296 ° |
| arcminute | 3,437.7 ′ |
| arcsecond | 206,265 ″ |
| gradian (gon) | 63.662 gon |
| revolution | 0.15915 rev |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Angle (choose its unit) | rad |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
- The arcminute and arcsecond outputs are totals; the note gives the angle as degrees, minutes and seconds.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
1 radian?
About 57.2958°.
A gradian?
1/400 of a turn: 0.9°.
Degrees-minutes-seconds?
Each degree has 60′, each minute 60″.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.