FireCADCalc

Torque Unit Converter (N·m, kgf·m, lbf·ft, lbf·in)

Convert a torque between newton metres, kilonewton metres, newton millimetres, kilogram-force metres and centimetres, pound-force feet and pound-force inches.

Inputs

Examples: 100 N mOne lbf ft

Results

Torque is force times lever arm; both factors convert.

newton metre1.3558N·m
kilonewton metre0.001356kN·m
newton millimetre1,355.8N·mm
kilogram-force metre0.13825kgf·m
kilogram-force centimetre13.825kgf·cm
pound-force foot1.0000lbf·ft
pound-force inch12.000lbf·in

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 N m. The inputs, in the units selected above:

InputValue
Torque (choose its unit)100.00 N·m

Applying the formula below gives:

ResultValue
newton metre100.00 N·m
kilonewton metre0.10000 kN·m
newton millimetre100,000 N·mm
kilogram-force metre10.197 kgf·m
kilogram-force centimetre1,019.7 kgf·cm
pound-force foot73.756 lbf·ft
pound-force inch885.07 lbf·in

Open this example in the calculator and change any input.

Formula

\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)

Variables

Symbol Meaning SI unit
\(x\) Torque (choose its unit) N·m

Method and standards

Each unit's factor to the SI unit is held once in the unit registry.

Where it is used

  • Reading foreign drawings and data sheets.
  • Examinations and everyday engineering.

Common mistakes

  • Mixing similar units (US and imperial).
  • Rounding factors too early.

Assumptions and limits

  • Exact factors where the definition is exact.

References

  • Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)

Questions and answers

100 N·m in lbf·ft?

About 73.76 lbf·ft.

kgf·m?

1 kgf·m = 9.80665 N·m.

Torque wrenches?

Often in N·m and lbf·ft on twin scales.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.