FireCADCalc

Water Leak and Wastage: Volume and Cost per Year

Water lost per year from a leak or continuous waste flow, its cost and the pumping energy, from the flow (or a bucket test) and the water and power prices.

Inputs

Examples: 0.2 L/s all yearDM water leak

Always per cubic metre, in any unit system: a price per 1,000 US gal divides by 3.785 to give the price per m³.
kWh per cubic metre in any unit system (kWh per 1,000 US gal ÷ 3.785).

Results

Water lost per year1,440.0m³
Water cost per year172,800
Pumping cost per year13,824
Total per year186,624

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 0.2 L/s all year. The inputs, in the units selected above:

InputValue
Leak or waste flow0.20000 L/s
Hours per year8,760.0 h
Water cost per m³ (supply and treatment)60.000 -
Pumping energy per m³ (kWh)0.40000 -
Electricity price per kWh8.0000 -

Applying the formula below gives:

ResultValue
Water lost per year6,307.2 m³
Water cost per year378,432
Pumping cost per year20,183
Total per year398,615

Open this example in the calculator and change any input.

Formula

\(V = \dot V t, \quad C = V(c_w + e_p c_e)\)

Variables

Symbol Meaning SI unit
\(\dot V\) Leak or waste flow m³/s
\(t\) Hours per year s
\(c_w\) Water cost per m³ (supply and treatment) -
\(e_p\) Pumping energy per m³ (kWh) -
\(c_e\) Electricity price per kWh -
\(V\) Water lost per year m³
\(C_w\) Water cost per year -
\(C_e\) Pumping cost per year -
\(C\) Total per year -

Method and standards

Volume and cost.

Where it is used

  • Water audits.
  • Cooling tower and boiler house losses.

Common mistakes

  • Ignoring treatment cost.
  • Intermittent leaks run all year.

Assumptions and limits

  • The water price and pumping energy are always per cubic metre, whatever unit system is chosen for the flow and volume; convert prices per 1,000 US gallons (÷ 3.785) before entering them.

  • Constant flow.

References

  • Volume = flow × time; cost = volume × (water price + pumping energy × tariff)

Questions and answers

0.2 L/s running all year?

About 6,307 m³: 398,615 a year.

Bucket test?

Litres collected / seconds gives L/s.

DM or treated water?

Its cost per m³ is far higher; use it.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.