FireCADCalc

Carbon Footprint of Electricity Use

CO₂ emissions from electricity use with your grid emission factor, per year and per unit of product, by the location-based Scope 2 method.

Inputs

Examples: 12 GWh plantOffice, no product

From your national grid authority for the year.

Results

Transmission and distribution losses are not added: if your grid factor is for generation, raise the electricity by the loss share first.

CO₂ per year576.00t

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 12 GWh plant. The inputs, in the units selected above:

InputValue
Electricity used per year12,000 MWh
Grid emission factor (kg CO₂ per kWh)0.72000 -
Production per year (0 to skip)50,000 -

Applying the formula below gives:

ResultValue
CO₂ per year8,640.0 t
CO₂ per unit of product (kg)172.80

Open this example in the calculator and change any input.

Formula

\(m_{CO_2} = E \cdot EF\)

Variables

Symbol Meaning SI unit
\(E\) Electricity used per year J
\(EF\) Grid emission factor (kg CO₂ per kWh) -
\(P\) Production per year (0 to skip) -
\(m_{CO_2}\) CO₂ per year kg
\(e_p\) CO₂ per unit of product (kg) -

Method and standards

Emission factor method.

Where it is used

  • Sustainability reports.
  • Product carbon footprints.

Common mistakes

  • Old grid factors.
  • Mixing location and market methods.

Assumptions and limits

  • Annual average factor; the per-unit figure is shown only when a production is entered.
  • No transmission and distribution loss factor is applied.

References

  • Scope 2 (location based): CO₂ = kWh × grid factor (GHG Protocol)

Questions and answers

12 GWh a year at 0.72 kg/kWh?

8,640 t CO₂: 172.8 kg per unit for 50,000 units.

Captive power?

Use the fuel's emissions (scope 1) instead.

Renewable purchase?

Market-based accounting uses the supplier's factor.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.