Worked example
Example: 12 GWh plant. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Electricity used per year | 12,000 MWh |
| Grid emission factor (kg CO₂ per kWh) | 0.72000 - |
| Production per year (0 to skip) | 50,000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| CO₂ per year | 8,640.0 t |
| CO₂ per unit of product (kg) | 172.80 |
Open this example in the calculator and change any input.
Formula
\(m_{CO_2} = E \cdot EF\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(E\) | Electricity used per year | J |
| \(EF\) | Grid emission factor (kg CO₂ per kWh) | - |
| \(P\) | Production per year (0 to skip) | - |
| \(m_{CO_2}\) | CO₂ per year | kg |
| \(e_p\) | CO₂ per unit of product (kg) | - |
Method and standards
Emission factor method.
Where it is used
- Sustainability reports.
- Product carbon footprints.
Common mistakes
- Old grid factors.
- Mixing location and market methods.
Assumptions and limits
- Annual average factor; the per-unit figure is shown only when a production is entered.
- No transmission and distribution loss factor is applied.
References
- Scope 2 (location based): CO₂ = kWh × grid factor (GHG Protocol)
Questions and answers
12 GWh a year at 0.72 kg/kWh?
8,640 t CO₂: 172.8 kg per unit for 50,000 units.
Captive power?
Use the fuel's emissions (scope 1) instead.
Renewable purchase?
Market-based accounting uses the supplier's factor.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.