FireCADCalc

Air Quality Sub-Index by Linear Interpolation

Air quality sub-index of a pollutant by linear interpolation between the breakpoints of its category, for any index whose breakpoints you enter.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationDistillery and ethanolChemical and fertiliserPulp and paper

Inputs

Examples: 75 in a 61–90 band mapping to 101–200150 in a 101–250 band mapping to 201–300

Results

Use the averaging period and breakpoints of your index (India's National AQI, US EPA AQI, …). The overall AQI is the highest sub-index among the pollutants measured.

The value is not rounded: the US EPA truncates the concentration to the breakpoints' precision and rounds the index to a whole number; apply your index's rounding rule.

Sub-index233.56

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 75 in a 61–90 band mapping to 101–200. The inputs, in the units selected above:

InputValue
Pollutant concentration75.000 -
Lower breakpoint of the category61.000 -
Upper breakpoint of the category90.000 -
Index at the lower breakpoint101.00 -
Index at the upper breakpoint200.00 -

Applying the formula below gives:

ResultValue
Sub-index148.79

Open this example in the calculator and change any input.

Formula

\(I_p = I_{lo} + \frac{I_{hi} - I_{lo}}{BP_{hi} - BP_{lo}}(C_p - BP_{lo})\)

Variables

Symbol Meaning SI unit
\(C_p\) Pollutant concentration -
\(BP_{lo}\) Lower breakpoint of the category -
\(BP_{hi}\) Upper breakpoint of the category -
\(I_{lo}\) Index at the lower breakpoint -
\(I_{hi}\) Index at the upper breakpoint -
\(I_p\) Sub-index -

Method and standards

Linear interpolation.

Where it is used

  • Ambient monitoring reports around plants.
  • Public communication of air quality.

Common mistakes

  • Wrong averaging period (24-h vs 8-h).
  • Using the wrong category.

Assumptions and limits

  • Piecewise-linear index.
  • The sub-index is shown unrounded; indices such as the US EPA AQI truncate the concentration and round the index to a whole number.

References

  • Linear interpolation between breakpoints
  • the method of India's National AQI (CPCB, 2014) and the US EPA AQI

Questions and answers

Why enter the breakpoints?

Each country's index uses its own breakpoints and averaging periods; enter those for your pollutant and category.

How is the overall AQI found?

Compute every pollutant's sub-index; the highest is the AQI and that pollutant is the 'responsible pollutant'.

What do the defaults represent?

A PM2.5-type concentration of 75 in a category spanning 61–90 that maps to index 101–200.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.