FireCADCalc

Yarn Twist: TPI, TPM and Twist Multiplier

Twists per inch and per metre from the twist multiplier and English count (TPI = TM √Ne), with the equivalent tex twist factor for metric users.

Food, dairy and textile

Inputs

Examples: 30s Ne, TM 3.840s knitting TM 3.2

Results

Twists per inch20.239
Twists per metre796.79
Tex twist factor (turns per cm × √tex)30.616

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 30s Ne, TM 3.8. The inputs, in the units selected above:

InputValue
English cotton count30.000 -
Twist multiplier3.8000 -

Applying the formula below gives:

ResultValue
Twists per inch20.813
Twists per metre819.43
Tex twist factor (turns per cm × √tex)36.356

Open this example in the calculator and change any input.

Formula

\(TPI = TM\sqrt{Ne}, \quad TPM = \frac{TPI}{0.0254}\)

Variables

Symbol Meaning SI unit
\(Ne\) English cotton count -
\(TM\) Twist multiplier -
\(TPI\) Twists per inch -
\(TPM\) Twists per metre -
\(\alpha_{m}\) Tex twist factor (turns per cm × √tex) -

Method and standards

Twist definitions.

Where it is used

  • Spinning settings.

Common mistakes

  • Mixing cotton and metric multipliers.

Assumptions and limits

  • Cotton count system.

References

  • Definitions and mass and energy balances: TPI = TM √Ne (cotton system); tex twist factor = turns per cm × √tex

Questions and answers

What twist multiplier is used?

About 3.6–4.2 for warp, 3.2–3.6 for weft and 2.5–3 for knitting yarns.

Why √Ne?

Equal twist angle in yarns of different fineness needs twist proportional to the square root of count.

What is TPM?

Twists per metre = TPI × 39.37.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.