Worked example
Example: 30s Ne, TM 3.8. The inputs, in the units selected above:
| Input | Value |
|---|---|
| English cotton count | 30.000 - |
| Twist multiplier | 3.8000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Twists per inch | 20.813 |
| Twists per metre | 819.43 |
| Tex twist factor (turns per cm × √tex) | 36.356 |
Open this example in the calculator and change any input.
Formula
\(TPI = TM\sqrt{Ne}, \quad TPM = \frac{TPI}{0.0254}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Ne\) | English cotton count | - |
| \(TM\) | Twist multiplier | - |
| \(TPI\) | Twists per inch | - |
| \(TPM\) | Twists per metre | - |
| \(\alpha_{m}\) | Tex twist factor (turns per cm × √tex) | - |
Method and standards
Twist definitions.
Where it is used
- Spinning settings.
Common mistakes
- Mixing cotton and metric multipliers.
Assumptions and limits
- Cotton count system.
References
- Definitions and mass and energy balances: TPI = TM √Ne (cotton system); tex twist factor = turns per cm × √tex
Questions and answers
What twist multiplier is used?
About 3.6–4.2 for warp, 3.2–3.6 for weft and 2.5–3 for knitting yarns.
Why √Ne?
Equal twist angle in yarns of different fineness needs twist proportional to the square root of count.
What is TPM?
Twists per metre = TPI × 39.37.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.