FireCADCalc

Yarn Count Conversion: Tex, Denier, Ne and Nm

Converts yarn linear density between tex, decitex, denier (direct systems) and English cotton count Ne and metric count Nm (indirect systems), from any one of them.

Food, dairy and textile

Inputs

Examples: 20 tex30s Ne150 denier

Results

Tex (g per 1000 m)2.2222
Decitex22.222
Denier (g per 9000 m)20.000
English cotton count (840-yd hanks per lb)265.74
Metric count (km per kg)450.00

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 20 tex. The inputs, in the units selected above:

InputValue
Count entered intex
Count value20.000 -

Applying the formula below gives:

ResultValue
Tex (g per 1000 m)20.000
Decitex200.00
Denier (g per 9000 m)180.00
English cotton count (840-yd hanks per lb)29.527
Metric count (km per kg)50.000

Open this example in the calculator and change any input.

Formula

\(\text{den} = 9\,\text{tex}, \quad Nm = \frac{1000}{\text{tex}}, \quad Ne = \frac{590.5}{\text{tex}}\)

Variables

Symbol Meaning SI unit
\(\text{system}\) Count entered in -
\(N\) Count value -
\(\text{tex}\) Tex (g per 1000 m) -
\(\text{dtex}\) Decitex -
\(\text{den}\) Denier (g per 9000 m) -
\(Ne\) English cotton count (840-yd hanks per lb) -
\(Nm\) Metric count (km per kg) -

Method and standards

Count definitions.

Where it is used

  • Yarn specification and costing.

Common mistakes

  • Mixing direct and indirect systems.
  • Using Ne for worsted counts.

Assumptions and limits

  • Single yarns; folded yarns need the resultant count.

References

  • Definitions and mass and energy balances: tex = g/1000 m; denier = g/9000 m; Ne = number of 840-yd hanks per lb; Nm = km/kg

Questions and answers

What is the difference between direct and indirect counts?

Direct counts (tex, denier) rise with thickness; indirect counts (Ne, Nm) fall.

What is 30s Ne in tex?

About 19.7 tex (590.5 / 30).

Why 590.5?

One Ne yarn weighs 1 lb per 840 yd: 453.6 g / 768.1 m × 1000 = 590.5 tex.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.