Worked example
Example: Pick-up 100 %, 10 % size. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Wet pick-up (size liquor per kg dry yarn) | 1.0000 kg/kg |
| Size solids in the liquor | 10.000 % |
| Warp yarn through the machine (dry) | 8.0000 t/d |
Applying the formula below gives:
| Result | Value |
|---|---|
| Size add-on on dry yarn | 10.000 % |
| Size solids used | 33.333 kg/h |
| Water evaporated in the drying cylinders | 300.00 kg/h |
Open this example in the calculator and change any input.
Formula
\(AO = PU\cdot c, \quad \dot M_s = \dot M_y\,AO, \quad \dot M_w = \dot M_y\,PU(1 - c)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(PU\) | Wet pick-up (size liquor per kg dry yarn) | kg/kg |
| \(c\) | Size solids in the liquor | - |
| \(\dot M_y\) | Warp yarn through the machine (dry) | kg/s |
| \(AO\) | Size add-on on dry yarn | - |
| \(\dot M_s\) | Size solids used | kg/s |
| \(\dot M_w\) | Water evaporated in the drying cylinders | kg/s |
Method and standards
Mass balance.
Where it is used
- Sizing recipes and cost.
Common mistakes
- Using wet yarn mass.
- Confusing pick-up with add-on.
Assumptions and limits
- Steady running.
- The sized yarn is taken to leave bone dry; in practice it enters and leaves with some regain (moisture), so the water evaporated is slightly overstated.
References
- Definitions and mass and energy balances
Questions and answers
What is wet pick-up?
Size liquor carried by the yarn after the squeeze rolls, per kg of dry yarn.
How is add-on controlled?
By liquor concentration and squeeze pressure.
Why does it matter?
Too little causes warp breaks; too much wastes size and makes desizing harder.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.