Worked example
Example: Combed yarn. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Cotton (lint) fed | 10,000 kg |
| Blowroom waste | 4.0000 % |
| Card waste | 5.0000 % |
| Comber noil (0 for carded yarn) | 16.000 % |
| Waste in later processes (draw frame to winding) | 2.0000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Yarn produced | 7,507.6 kg |
| Yarn realisation | 75.076 % |
| Cotton per kg of yarn | 1.3320 kg/kg |
Open this example in the calculator and change any input.
Formula
\(R = (1 - w_b)(1 - w_c)(1 - w_{cb})(1 - w_o), \quad Y = MR\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M\) | Cotton (lint) fed | kg |
| \(w_b\) | Blowroom waste | - |
| \(w_c\) | Card waste | - |
| \(w_{cb}\) | Comber noil (0 for carded yarn) | - |
| \(w_o\) | Waste in later processes (draw frame to winding) | - |
| \(Y\) | Yarn produced | kg |
| \(R\) | Yarn realisation | - |
| \(M/Y\) | Cotton per kg of yarn | kg/kg |
Method and standards
Sequential mass balance.
Where it is used
- Spinning mill costing.
- Cotton purchasing.
Common mistakes
- Adding waste percentages.
- Ignoring moisture differences.
Assumptions and limits
- Same moisture basis throughout.
- Each waste share is on the input to its own process. Mill figures quoted on cotton fed must be converted first (or simply subtracted from 100 % for the realisation).
References
- Definitions and mass and energy balances: each waste share on the input to its process
Questions and answers
What realisation is typical?
Carded yarn about 85–88 %; combed yarn about 72–76 % with 15–18 % noil.
Why multiply the shares?
Waste at each stage is taken from what that stage receives, not from the original cotton.
Is waste lost?
Much is sold or reused in coarser yarns; it still lowers realisation.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.